docs(prs): the init-config-resolution PR-doc

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

.claude/skills/architecture/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: architecture
-description: Detailed Werkator subsystem architecture — CLI wiring and exit codes, server mode, web UI, configuration system, git access, build execution (native, Docker, and bwrap), watcher poll cycle, and system metrics. Use when designing or modifying code in the commands, config, git, gitea, build, artifacts, watcher, metrics, or server packages, or when a question goes beyond the overview in AGENTS.md.
+description: Detailed Werkator subsystem architecture — CLI wiring and exit codes, server mode, web UI, configuration system, git access, build execution (native, Docker, and the werkdock sandbox), watcher poll cycle, and system metrics. Use when designing or modifying code in the commands, config, git, gitea, build, artifacts, watcher, metrics, or server packages, or when a question goes beyond the overview in AGENTS.md.
 ---
 
 # Werkator Architecture
@@ -49,7 +49,7 @@ Werkator is configured by three YAML files, deep-merged by `ConfigLoader` (later
 
 Every lookup falls back to the pre-rename name (`ConfigFiles`): `.gittally.yml`, and `.git/gittally/.gittally.yml` for the machine layer. Current name first, and where both exist the old one is ignored rather than merged — a missing config is not an error, so an un-renamed installation would otherwise start on defaults without a single failure.
 
-On top of those comes the **branch layer**: the `.werkator.yml` committed on a branch, applied by `loadWithBranchLayer` (the watcher passes the content read via `git show`, `loadForWorktree` the file in the build worktree). A branch describes its own CI and wins over both layers — the whole `builds` section — so a configuration can be tried out on a branch without touching other branches' builds. `stripPinned` removes what is not a description of this branch's build: `git`, `server`, `gitea`, `executor`, `watcher`, and — inside every `builds` definition as well as every legacy `branches` entry — `requirePullRequest`, `statusContext`, `docker.enabled`/`docker.network`, and `bwrap.enabled`/`bwrap.rootfs`/`bwrap.werkdock`.
+On top of those comes the **branch layer**: the `.werkator.yml` committed on a branch, applied by `loadWithBranchLayer` (the watcher passes the content read via `git show`, `loadForWorktree` the file in the build worktree). A branch describes its own CI and wins over both layers — the whole `builds` section — so a configuration can be tried out on a branch without touching other branches' builds. `stripPinned` removes what is not a description of this branch's build: `git`, `server`, `gitea`, `executor`, `watcher`, and — inside every `builds` definition as well as every legacy `branches` entry — `requirePullRequest`, `statusContext`, `docker.enabled`/`docker.network`, and `werkdock.enabled`/`werkdock.rootfs`/`werkdock.binary` (the section was called `bwrap` until v1.2.0; `renameLegacySandbox` maps the old name onto the new one on every raw layer, before merging).
 
 Each file is version-checked before merging (`werkator.version.since`/`below`, `ConfigVersions.verdict`), so the message can name the file to fix: `since` is hard in both directions — too old a Werkator, or a file written before `ConfigVersions.FORMAT_BROKE_IN` and read after it — while `below` only warns. There is no format version (`apiVersion`) on purpose: only one configuration generation is supported, and the declared version exists to make the incompatibility nameable.
 
@@ -71,9 +71,9 @@ Everything repository-scoped goes through a `RepoContext` (`repo` package, ADR 0
 
 On context close (e.g. systemd SIGTERM), a `ContextClosedEvent` listener in `BuildExecutor` terminates the process trees of all executing builds and waits (bounded) until their results are persisted as INTERRUPTED — a shutdown is never recorded as FAILED. Builds still queued stay PENDING and start no process. Both are re-enqueued by the watcher's startup recovery; INTERRUPTED therefore publishes as Gitea state `pending`, not `failure` (`GiteaStateMapping`).
 
-The runtime is selected per build behind the `BuildRunner` interface: `DispatchingBuildRunner` (`@Primary`) routes to native `ProcessBuildRunner` (the default), to `DockerBuildRunner` when `docker.enabled`, or to `BwrapBuildRunner` when `bwrap.enabled` — docker and bwrap are mutually exclusive per build and rejected in `buildSettings`, never picked silently. The Docker runner shells out to the `docker` CLI (no SDK): it (re)builds the configured image when the Dockerfile inputs changed (tracked via the `org.werkator.build-inputs-sha256` image label), maintains a per-repo Gradle cache volume, mounts the worktree and the Docker socket into a labelled (`org.hoennig.werkator`) `--rm --init` container, and repairs workspace ownership in-container after each command (under a rootless daemon the container runs as root, which is the host user, and the repair degenerates to `0:0`). Git works inside the container: the primary `.git` is mounted read-only with `.git/werkator/` masked by an empty tmpfs (credential isolation) and the worktree's admin dir mounted read-write (`gitMetadataMounts`). The returned `Process` is the attached `docker run` client, so log streaming and termination work exactly like native builds.
+The runtime is selected per build behind the `BuildRunner` interface: `DispatchingBuildRunner` (`@Primary`) routes to native `ProcessBuildRunner` (the default), to `DockerBuildRunner` when `docker.enabled`, or to `WerkdockBuildRunner` when `werkdock.enabled` — docker and werkdock are mutually exclusive per build and rejected in `buildSettings`, never picked silently. The Docker runner shells out to the `docker` CLI (no SDK): it (re)builds the configured image when the Dockerfile inputs changed (tracked via the `org.werkator.build-inputs-sha256` image label), maintains a per-repo Gradle cache volume, mounts the worktree and the Docker socket into a labelled (`org.hoennig.werkator`) `--rm --init` container, and repairs workspace ownership in-container after each command (under a rootless daemon the container runs as root, which is the host user, and the repair degenerates to `0:0`). Git works inside the container: the primary `.git` is mounted read-only with `.git/werkator/` masked by an empty tmpfs (credential isolation) and the worktree's admin dir mounted read-write (`gitMetadataMounts`). The returned `Process` is the attached `docker run` client, so log streaming and termination work exactly like native builds.
 
-`BwrapBuildRunner` (ADR 0008) is the third runtime, for hosts without root and without Docker — Hostsharing Managed Webspaces. It shells out to the `bwrap` CLI (no library): a prepared rootfs archive (`bwrap.rootfs`, built by `tools/build-bwrap-rootfs.sh`) is unpacked on demand into `.git/werkator/buildenv/<envKey>/rootfs` and bound read-only at `/`, with uid 0 inside mapped to the calling user; isolation is filesystem-only — network, uid, `/proc`, `/dev` are the host's by contract. It reuses the Docker runner's `gitMetadataMounts`; mount order matters (repo dir read-write before the metadata mounts and the workspace), and bind mountpoints missing from the rootfs are pre-created there, since the rootfs is a plain host directory while bwrap cannot mkdir against the read-only sandbox root. `bwrap.enabled`/`bwrap.rootfs` are pinned like the docker sandbox policy. The returned `Process` is the attached `bwrap` process, so streaming and cancellation are unchanged. The generic sandbox machinery is the standalone tool [Werkdock](https://git.javagil.de/mi/werkdock) (plan step 21: grown in `werkdock/`, consumed via the CLI since session C, its own repository since session E); the runner delegates to the `werkdock` CLI and this repository no longer carries its source.
+`WerkdockBuildRunner` (ADR 0008) is the third runtime, for hosts without root and without Docker — Hostsharing Managed Webspaces. It shells out to the `bwrap` CLI (no library): a prepared rootfs archive (`werkdock.rootfs`, built by `tools/build-bwrap-rootfs.sh`) is unpacked on demand into `.git/werkator/buildenv/<envKey>/rootfs` and bound read-only at `/`, with uid 0 inside mapped to the calling user; isolation is filesystem-only — network, uid, `/proc`, `/dev` are the host's by contract. It reuses the Docker runner's `gitMetadataMounts`; mount order matters (repo dir read-write before the metadata mounts and the workspace), and bind mountpoints missing from the rootfs are pre-created there, since the rootfs is a plain host directory while bwrap cannot mkdir against the read-only sandbox root. `werkdock.enabled`/`werkdock.rootfs` are pinned like the docker sandbox policy. The returned `Process` is the attached `bwrap` process, so streaming and cancellation are unchanged. The generic sandbox machinery is the standalone tool [Werkdock](https://git.javagil.de/mi/werkdock) (plan step 21: grown in `werkdock/`, consumed via the CLI since session C, its own repository since session E); the runner delegates to the `werkdock` CLI and this repository no longer carries its source.
 
 ## Watcher
 

AGENTS.md

@@ -40,9 +40,9 @@ All production code lives under `de.hoennig.werkator`, with sub-packages `comman
 - Everything repository-scoped (results, artifacts, worktrees, git and config access) goes through a `RepoContext`, never through an implicit current directory: the executor serializes per (context, branch) under one global `maxConcurrent`, the watcher polls every context in its own guard. `RepoRegistry` opens one context per entry of the instance configuration `~/.werkator.yml` (ADR 0009), or the current directory without one; the instance-level keys (`server`, `executor`, `watcher.pollInterval`) and the `defaults` block are folded into every repository's effective config by `ConfigLoader` itself, so no consumer reads the home file directly. Server routes carry the repository as `/repos/<name>/…` and `/api/repos/<name>/…`, with the unscoped form permanently meaning the served repository; the pages stay per repository and a drop-down in the page title switches between them.
 - When config keys change, three places must stay in sync: the `WerkatorConfig` data classes, the `InitCommand` templates, and `docs/configuration.md`.
 - Every config file may declare `werkator.version.since`/`below` (the Werkator it is written for, never a format version — no API is involved). `since` is enforced in both directions, using `ConfigVersions.FORMAT_BROKE_IN` for "file predates a breaking change"; `below` only warns. A violation aborts the start for the machine and project config, but fails only that branch's builds for a branch config.
-- A branch describes its own CI: its committed `.werkator.yml` is the branch layer (`ConfigLoader.loadWithBranchLayer`, used by the watcher per origin branch and by `loadForWorktree` at build time) and takes precedence over `.git`/project — including the whole `builds` section, so a new configuration can be tried out on a branch without affecting other branches. Only the pinned set is stripped from that layer: secrets (`git`), host/repository sections (`server`, `gitea`, `executor`, `watcher`), the docker (`docker.enabled`, `docker.network`) and bubblewrap (`bwrap.enabled`, `bwrap.rootfs`, `bwrap.werkdock`) sandbox policies, and the trust gate (`requirePullRequest`). A branch must never reach credentials, disable its container or sandbox, change its network, substitute a foreign rootfs, raise global concurrency, or bypass its own pull-request gate; a branch's definitions apply to that branch alone.
+- A branch describes its own CI: its committed `.werkator.yml` is the branch layer (`ConfigLoader.loadWithBranchLayer`, used by the watcher per origin branch and by `loadForWorktree` at build time) and takes precedence over `.git`/project — including the whole `builds` section, so a new configuration can be tried out on a branch without affecting other branches. Only the pinned set is stripped from that layer: secrets (`git`), host/repository sections (`server`, `gitea`, `executor`, `watcher`), the docker (`docker.enabled`, `docker.network`) and werkdock (`werkdock.enabled`, `werkdock.rootfs`, `werkdock.binary`) sandbox policies, and the trust gate (`requirePullRequest`). A branch must never reach credentials, disable its container or sandbox, change its network, substitute a foreign rootfs, raise global concurrency, or bypass its own pull-request gate; a branch's definitions apply to that branch alone.
 - A build definition carries the complete description of its build, split in two: the `trigger` block (`onPush`, `atTimes`, `branches`, `activeWithin`) says when and for which branches it runs, everything else what it does. `builds.default` is the base every other definition inherits its settings — never its `trigger` — from. The split is structural so that a selector added to `TriggerConfig` later is non-inheritable by construction; writing a trigger key flat is refused, never ignored, because ignoring it leaves a build that silently stops running. A `!` prefix in `trigger.branches` excludes and always wins.
-- The inheritance is applied after all layers are merged: that order is what makes a build a branch invents inherit the host's sandbox policy instead of the data-class default, so the pinning also holds for a build the host has never heard of. Pinned are `requirePullRequest`, `statusContext`, `docker.enabled`, `docker.network`, `bwrap.enabled`, `bwrap.rootfs`, and `bwrap.werkdock`. Docker and bwrap are mutually exclusive per branch — enabling both is rejected at start.
+- The inheritance is applied after all layers are merged: that order is what makes a build a branch invents inherit the host's sandbox policy instead of the data-class default, so the pinning also holds for a build the host has never heard of. Pinned are `requirePullRequest`, `statusContext`, `docker.enabled`, `docker.network`, `werkdock.enabled`, `werkdock.rootfs`, and `werkdock.binary`. Docker and werkdock are mutually exclusive per branch — enabling both is rejected at start. The section was called `bwrap` until v1.2.0 and is still read under that name, with a warning; the hard refusal waits for the release that sets `ConfigVersions.FORMAT_BROKE_IN`.
 - `builds` or the legacy `branches`, never both: `branches` is read only while the merged config defines no build at all (`builds.maxConcurrent` is not one), and ignored with a warning as soon as one exists. The section is deprecated and goes away once the repositories have migrated; then `ConfigVersions.FORMAT_BROKE_IN` gets set and a leftover `branches:` key must be rejected by name — the version check alone cannot catch a file that declares no version.
 - Web UI: server-rendered Thymeleaf plus one hand-written `static/werkator.js` — no SPA framework, no frontend build pipeline; every fetch has a timeout and an explicit error badge; `UiFormats` and `werkator.js` must produce identical display formats.
 - Git and Docker access shells out to the CLIs (`GitCommandRunner`, `docker`) — no JGit, no Docker SDK.

build.gradle.kts

@@ -13,7 +13,7 @@ group = "de.hoennig"
 // so the UI footer (BuildProperties), --version and the release notes identify what is
 // actually running; a deployment bundles whatever was committed since the last one.
 // ReleaseVersionConsistencyTest fails the build if this and the top releases.html entry disagree.
-version = "1.1.2"
+version = "1.2.0"
 
 java {
     toolchain {

docs/configuration.md

@@ -71,7 +71,7 @@ above, giving the precedence **branch > repo install > project**. It takes prece
 everything that describes how this branch is built: the whole `builds` section — its own
 definitions and its overrides of the definitions from the project config, with
 `buildCommand`, `cleanCommand`, `artifactDirs`, log file names, and
-`docker.image`/`dockerfile`/`context`/`env` and `bwrap.env` inside them. That is how a new configuration is tried out: change it on a branch, and
+`docker.image`/`dockerfile`/`context`/`env` and `werkdock.env` inside them. That is how a new configuration is tried out: change it on a branch, and
 no other branch's builds are affected.
 
 The branch layer is used in both places where it matters: the watcher reads the committed
@@ -99,7 +99,7 @@ single branch may decide it:
 - the repository-side settings: the whole `gitea`, `executor`, and `watcher` sections;
 - the trust gate: `requirePullRequest`, and the Gitea status context: `statusContext`;
 - the container sandbox policy: `docker.enabled`/`docker.network` and
-  `bwrap.enabled`/`bwrap.rootfs`/`bwrap.werkdock` — host-pinned as
+  `werkdock.enabled`/`werkdock.rootfs`/`werkdock.binary` — host-pinned as
   long as only the host's configuration sets them, master-pinned once the committed
   configuration does.
 
@@ -406,9 +406,9 @@ That is how a branch gets a build of its own without being built by the default
 `activeWithin` (e.g. `24h`) additionally keeps only branches whose origin head commit is younger than the duration — useful to run a nightly deep check over all recently active branches.
 Both parts combine as an intersection.
 
-Settings: `buildCommand`, `cleanCommand`, `artifactDirs`, `stdoutLog`/`stderrLog`, `requirePullRequest`, `statusContext`, and `docker` and `bwrap` with all their keys.
+Settings: `buildCommand`, `cleanCommand`, `artifactDirs`, `stdoutLog`/`stderrLog`, `requirePullRequest`, `statusContext`, and `docker` and `werkdock` with all their keys.
 A definition carries the complete description of its build; unset keys fall back to `builds.default` and then to Werkator's own defaults.
-`requirePullRequest`, `statusContext`, `docker.enabled`, `docker.network`, `bwrap.enabled`, `bwrap.rootfs`, and `bwrap.werkdock` are pinned (master-pinned, see [the branch layer](#the-branch-layer-a-branch-describes-its-own-ci)): they are read from the repo install/project config even when a branch sets them in its own committed config.
+`requirePullRequest`, `statusContext`, `docker.enabled`, `docker.network`, `werkdock.enabled`, `werkdock.rootfs`, and `werkdock.binary` are pinned (master-pinned, see [the branch layer](#the-branch-layer-a-branch-describes-its-own-ci)): they are read from the repo install/project config even when a branch sets them in its own committed config.
 Inheritance from `builds.default` covers the settings only — the `trigger` block says when and where *this* build runs and is never inherited.
 Definitions are part of the branch layer: a branch may add its own and override those from the project config, for its own builds only.
 Because the inheritance is applied after all layers are merged, a build a branch invents still inherits the host's `builds.default` — its sandbox policy included, which is what keeps the pinning effective for a build the host has never heard of.
@@ -464,22 +464,23 @@ Note that the rest of `.git` — including `.git/config` — is visible to build
 The Docker socket is mounted into the container and `DOCKER_HOST`/`TESTCONTAINERS_*` variables are set, so Testcontainers-based builds work inside the container.
 All Werkator containers carry `org.hoennig.werkator` labels; stale build containers of the repository are removed before the first Docker build after a restart.
 
-### Notes on `builds.<name>.bwrap`
+### Notes on `builds.<name>.werkdock`
 
-With `bwrap.enabled`, Werkator runs the build in a bubblewrap sandbox instead of native execution.
+With `werkdock.enabled`, Werkator runs the build in a bubblewrap sandbox instead of native execution.
 This is the third runtime, for hosts without root and without a Docker daemon (e.g. Hostsharing managed webspaces); see `docs/plan/17-bwrap-build-runtime.md` and ADR 0008.
-Since step 21 session C the sandbox is executed by the `werkdock` CLI (`bwrap.werkdock`, default: resolved via `PATH`) — Werkator no longer invokes `bwrap` itself; `bwrap` must be installed for werkdock.
+Since step 21 session C the sandbox is executed by the `werkdock` CLI (`werkdock.binary`, default: resolved via `PATH`) — Werkator no longer invokes `bwrap` itself; `bwrap` must be installed for werkdock.
+The section was called `bwrap` and its binary key `bwrap.werkdock` until v1.2.0; both are still read, with a warning naming the file, so an installation can be migrated at its next configuration edit rather than at the next update.
 `werkdock doctor` checks the host's capability (it replaced the retired `tools/werkator-build-prerequisites.sh` in step 23).
 
-`bwrap.rootfs` names the prepared root filesystem archive — a Debian-base rootfs with the build tools (JDK, git, locales, project-specific tooling) built elsewhere, since `debootstrap` is unavailable on the target.
+`werkdock.rootfs` names the prepared root filesystem archive — a Debian-base rootfs with the build tools (JDK, git, locales, project-specific tooling) built elsewhere, since `debootstrap` is unavailable on the target.
 It is a local path or an `http(s)` URL; a URL is downloaded once into `.git/werkator/buildenv/`.
 Build the archive with `tools/build-bwrap-rootfs.sh` on any machine with Docker.
 The archive is loaded once per source as the werkdock image `werkator-buildenv-<hash>` into werkdock's store (`$WERKDOCK_HOME`, default `~/.werkdock`) — shared by every repository of this OS user; the hash derives from the source string, so a changed `rootfs` loads a fresh image and stale ones can be removed from the store.
 Per-repo Gradle caches persist in `.git/werkator/buildenv/home`, bound as `/root`.
-`bwrap.env` adds environment variables inside the sandbox; the environment is otherwise cleared (docker semantics) — the server's environment does not leak in.
+`werkdock.env` adds environment variables inside the sandbox; the environment is otherwise cleared (docker semantics) — the server's environment does not leak in.
 Files created inside the sandbox are owned by the host user, because uid 0 maps back to the unprivileged webspace user.
 
-`docker` and `bwrap` are mutually exclusive per branch: enabling both is rejected at start, not silently picked.
+`docker` and `werkdock` are mutually exclusive per branch: enabling both is rejected at start, not silently picked.
 Git works inside the sandbox exactly as inside the Docker container: the primary `.git` is mounted read-only with `.git/werkator/` masked, so builds can run read-only git commands but never reach the machine config or the control token.
 
 ## `.git/werkator/.werkator.yml` (not committed)

docs/deployment.md

@@ -185,7 +185,7 @@ The tarball unpacks to a `werkator/` directory, so it must not be extracted over
 Rollback is the reverse: stop, remove the new directory (or jar), move `.bak` back, start.
 
 `tools/remote --env-file .env.<instance> werkator instance-update` does the same sequence for any host, not only the webspace layout it was written for.
-Three optional keys in the env file name what differs (see the script's header): `WERKATOR_REPO_DIR` (directory of the watched repository, which also names the systemd unit), `WERKATOR_INSTALL_DIR` (where the runtime bundle is unpacked), and `WERKATOR_SANDBOX` (`bwrap`, the default, or `docker` — a Docker host has no werkdock binary and no rootfs archive to upload).
+Three optional keys in the env file name what differs (see the script's header): `WERKATOR_REPO_DIR` (directory of the watched repository, which also names the systemd unit), `WERKATOR_INSTALL_DIR` (where the runtime bundle is unpacked), and `WERKATOR_SANDBOX` (`werkdock`, the default, or `docker` — a Docker host has no werkdock binary and no rootfs archive to upload).
 Their defaults are the layout `instance-install` creates, so an env file that names none of them behaves exactly as before.
 The upload happens before the service is stopped and every artifact is checksum-verified after the transfer, so a dropped connection costs the transfer and not the running service.
 
@@ -329,7 +329,7 @@ Werkator runs as a systemd *user* service on the assigned localhost port ("eigen
 Werkator is never built on the webspace: the runtime bundle and the werkdock binary are built locally and uploaded (ADR 0006).
 All steps are driven by `tools/remote`; commands name their role — `instance-*` manages the installed Werkator, `repo-*` the repository it watches.
 Each instance is a pair of files (step 23): a transport env file selected with `--env-file` (default `.env`), and a YAML fragment in the configuration schema, named by its `WERKATOR_INIT_CONFIG` key and installed remotely via `werkator init --apply` — e.g. `.env.mih34` + `.env.mih34.yml`, both gitignored.
-The fragment carries the Werkator configuration (`server.port`, `publicBaseUrl`, systemd limits, `builds.default.bwrap.*`); the env file only says where and how to reach the host.
+The fragment carries the Werkator configuration (`server.port`, `publicBaseUrl`, systemd limits, `builds.default.werkdock.*`); the env file only says where and how to reach the host.
 
 ```bash
 tools/remote --env-file .env.mih34 werkator check-prerequisites  # uploads werkdock, runs its doctor

docs/prs/2026-09-03-PR#19-werkdock-config-section.md

@@ -0,0 +1,98 @@
+> **WARNING:** This document describes only the change applied in this PR.
+> It may already be outdated once the next PR is merged.
+> Historic PR-documentation is not maintained along with new PRs — treat it as a snapshot, not as current documentation.
+
+## The Problem
+
+The build sandbox for hosts without Docker was configured as `bwrap`, named after the mechanism rather than after the thing Werkator runs.
+Since step 21 session C (v1.0.0) Werkator does not invoke `bwrap` at all: it shells out to the [werkdock](https://git.javagil.de/mi/werkdock) CLI, which assembles the bubblewrap invocation and owns the image store.
+The name outlived its truth, and the clearest symptom was the key `bwrap.werkdock` — a section naming its own executor.
+
+It also leaked outward.
+`tools/remote` gained a `WERKATOR_SANDBOX` key in PR#18 whose value had to be `bwrap` while the very thing it switches on is *uploading the werkdock binary*, and the question that prompted this PR — "is there also `WERKATOR_SANDBOX=werkdock`?" — is one nobody would ask about a name that matched.
+
+## Non-Goals
+
+- Refusing the old name. That belongs to the release which sets `ConfigVersions.FORMAT_BROKE_IN` (plan step 18): only there can a file that declares no version be caught by name at all, and only there is one migration asked of the operator instead of two.
+- Renaming `tools/build-bwrap-rootfs.sh` or `docs/plan/17-bwrap-build-runtime.md`. The script really does build a bubblewrap rootfs, and plan documents are historic records.
+- Touching ADR 0008, which decided the *runtime* and is a snapshot of that decision.
+
+## The Scenarios
+
+### Feature: the sandbox is named after the tool that runs it
+
+#### Background
+
+- `builds.<name>.werkdock` replaces `builds.<name>.bwrap`, and `werkdock.binary` replaces `bwrap.werkdock`.
+- The pinned set is unchanged in meaning: `enabled`, `rootfs` and the binary stay host-pinned, under their new names.
+
+#### Scenario#19.01: A configuration written for the old name keeps working
+
+So that no installation has to be edited before it can be updated — the section lives in machine configurations that no repository tracks.
+
+- **Given** a configuration writing `builds.default.bwrap` with `enabled`, `rootfs`, `werkdock` and `env`
+- **When** the configuration is loaded
+- **Then** the settings appear as `werkdock.enabled`, `werkdock.rootfs`, `werkdock.binary` and `werkdock.env`, and the file is named once in a warning
+
+##### Verified by
+
+- [ConfigLoaderTest — "the legacy bwrap section is read as werkdock, its werkdock key as binary"](../../src/test/kotlin/de/hoennig/werkator/config/ConfigLoaderTest.kt)
+
+#### Scenario#19.02: The old name is not a way around the pinning
+
+So that a branch cannot escape its sandbox by writing the section a branch is not allowed to write under its previous name.
+
+- **Given** a host configuration with `werkdock.enabled: true` and a rootfs
+- **When** a branch's committed config sets `bwrap.enabled: false` with a foreign rootfs
+- **Then** the sandbox stays enabled and the host's rootfs is used
+
+##### Verified by
+
+- [ConfigLoaderTest — "a legacy bwrap section on a branch is pinned exactly like the new name"](../../src/test/kotlin/de/hoennig/werkator/config/ConfigLoaderTest.kt)
+
+#### Scenario#19.03: The new name behaves exactly as the old one did
+
+So that the rename is a rename, not a change of behavior.
+
+- **Given** configurations using `werkdock` throughout
+- **When** builds are dispatched, pinned keys stripped, and both sandboxes enabled at once
+- **Then** the werkdock runner is selected, the branch cannot override the pinned keys, and enabling docker and werkdock together is rejected naming both
+
+##### Verified by
+
+- [DispatchingBuildRunnerTest — "runs in the werkdock sandbox when the branch enables it (and not Docker)"](../../src/test/kotlin/de/hoennig/werkator/build/DispatchingBuildRunnerTest.kt)
+- [ConfigLoaderTest — "a branch cannot disable its werkdock sandbox …"](../../src/test/kotlin/de/hoennig/werkator/config/ConfigLoaderTest.kt) and "enabling both docker and werkdock on a build is rejected, not picked silently"
+- [WerkdockBuildRunnerTest](../../src/test/kotlin/de/hoennig/werkator/build/WerkdockBuildRunnerTest.kt), unchanged in substance and renamed with the runner
+
+## The Solution
+
+`BwrapConfig` → `WerkdockConfig` (field `werkdock` → `binary`), `BwrapOverrides` → `WerkdockOverrides`, `BranchConfig.bwrap` → `.werkdock`, `BwrapBuildRunner` → `WerkdockBuildRunner`, and `PINNED_BWRAP_KEYS` → `PINNED_WERKDOCK_KEYS` with `binary` in place of `werkdock`.
+
+The compatibility lives in exactly one function, `ConfigLoader.renameLegacySandbox`, applied in `loadFile` and `parseYaml` — the two places a raw layer enters — so it runs before merging, before pinning and before binding, and every consumer downstream knows one name.
+That placement is what makes Scenario#19.02 hold without a second thought: the branch layer is normalised *before* `stripPinned` reads it, so the old name cannot smuggle a pinned key past a check that looks for the new one.
+Where a file writes both sections, the explicit `werkdock` one wins, because it is the name that is meant.
+The warning is emitted once per file (`warnedSections`), like the other section-level warnings, since the config is re-read on every poll cycle.
+
+The version is bumped to 1.2.0 with a release note: the minor, because this changes the configuration schema, and a deployment must be identifiable as the one that introduced it.
+
+## Open Questions
+
+- **Should `WERKATOR_SANDBOX` keep accepting `bwrap`?** It does today, normalised on read and documented as the former name. The env files are local and gitignored, so this alias costs one line and can go whenever the config alias does.
+
+## Additional Changes
+
+- None beyond the rename and its documentation.
+
+## Deployment note
+
+The order matters, and only in one direction: deploy v1.2.0 to a host *before* rewriting its init fragment (`.env.<instance>.yml`) to the new key names.
+A fragment carrying `werkdock:` applied by an older Werkator fails the fragment's strict schema validation — which is the safe outcome, but a failed `repo-init` nonetheless.
+The reverse never breaks: v1.2.0 reads every existing `bwrap:` fragment and machine config as before.
+
+## Prerequisite PRs
+
+- [PR#18](2026-09-03-PR%2318-remote-host-layout.md) introduced `WERKATOR_SANDBOX`, whose value this PR renames.
+
+## Follow-up PRs
+
+- Plan step 18 (removing the legacy `branches` section) sets `ConfigVersions.FORMAT_BROKE_IN`; the `bwrap` alias should be dropped in the same release, refusing the key by name.

docs/prs/2026-09-04-PR#20-deflake-maxconcurrent-test.md

@@ -0,0 +1,42 @@
+> **WARNING:** This document describes only the change applied in this PR.
+> It may already be outdated once the next PR is merged.
+> Historic PR-documentation is not maintained along with new PRs — treat it as a snapshot, not as current documentation.
+
+## The Problem
+
+The build for commit `7028ca8` on `main` failed on the mih09 production instance with
+`BuildExecutorTest > with maxConcurrent 1 a second branch stays PENDING until the first finished`,
+while a retry of the very same commit passed, and the test passes locally.
+
+The test was timing-dependent.
+It started a build for `branch-a` whose build command was `sleep 1`, immediately started a second build for `branch-b`,
+and then asserted — without any synchronization at all — that `branch-b` was still `PENDING`.
+
+That assertion only held as long as the test thread reached it within the one second `branch-a` slept.
+On a shared host under CPU contention the executor can get through `branch-a` entirely (queued, running, slept, succeeded) first,
+and `branch-b` is then already `RUNNING` or `SUCCESS` when the assertion runs.
+The failure therefore says nothing about the executor; it is pure scheduling noise that costs a build and a retry every time it hits.
+
+## Non-Goals
+
+- No change to production code — `BuildExecutor` is not touched, its queueing behaviour is unchanged.
+- No sweep of the other timing-sensitive tests in the suite; only the one that actually flaked is fixed.
+
+## The Solution
+
+`branch-a` no longer sleeps for a fixed time, it blocks until the test says so:
+its build command is `until [ -f gate ]; do sleep 0.05; done`, and the build workspace is the test's working directory.
+
+The test now
+1. waits (via `eventually`) until `branch-a` is `RUNNING`, so the single executor slot is provably occupied,
+2. asserts that `branch-b` is `PENDING` — which cannot race anything, because `branch-a` cannot finish before the gate file exists,
+3. creates the gate file, and only then awaits both builds' `SUCCESS`.
+
+The assertion on the event transitions (`branch-b` goes `RUNNING` only after `branch-a` reached `SUCCESS`) is unchanged.
+A blocking gate was chosen over a mocked `BuildRunner` because it keeps the test on the real `ProcessBuildRunner`,
+so it still covers the actual process handling rather than only the executor's bookkeeping.
+
+Verified by running `BuildExecutorTest` five times on an idle machine and three more times with twice `nproc` busy-loops saturating the CPU,
+which is the condition that produced the original failure.
+
+- [BuildExecutorTest](../../src/test/kotlin/de/hoennig/werkator/build/BuildExecutorTest.kt)

docs/prs/2026-09-04-PR#21-gitea-default-clone-url.md

@@ -0,0 +1,30 @@
+> **WARNING:** This document describes only the change applied in this PR.
+> It may already be outdated once the next PR is merged.
+> Historic PR-documentation is not maintained along with new PRs — treat it as a snapshot, not as current documentation.
+
+## The Problem
+
+The repository's home is `https://git.javagil.de/mi/werkator.git` since the move to the own Gitea instance,
+but `tools/remote` still defaulted `WERKATOR_REPO_URL` to the GitHub mirror.
+
+The mih09 production instance was cloned from that mirror and consequently watched a `main` that nobody pushes to any more:
+it kept reporting the last GitHub state as green while three merged pull requests sat unbuilt on the real `main`.
+The failure that started this — a flaky test already fixed on Gitea's `main` — could not be re-verified live,
+because the instance had no way to see the fix.
+
+## Non-Goals
+
+- The existing clone on mih09 is not touched by this change; its remote was repointed by hand (`git remote set-url`), and `repo-init` skips an existing clone.
+- The generic placeholder URLs in `docs/deployment.md` stay as they are — they describe cloning *any* watched repository, not werkator's own.
+- No decision about mirroring to GitHub; the mirror simply stops being the source an instance builds from.
+
+## The Solution
+
+`REPO_URL` in [tools/remote](../../tools/remote) defaults to the Gitea URL, and the usage comment says so.
+
+The value stays overridable via `WERKATOR_REPO_URL` in the instance's env file,
+so an installation that deliberately watches a different remote is unaffected.
+Anonymous HTTPS works against Gitea exactly as it did against GitHub, so no deploy key or token is involved.
+
+Note that pull requests opened via AGit-Flow create no branch in Gitea,
+so an instance watching this remote sees `main` only — branch builds require pushing real branches.

docs/prs/2026-09-04-PR#22-init-config-resolution.md

@@ -0,0 +1,90 @@
+> **WARNING:** This document describes only the change applied in this PR.
+> It may already be outdated once the next PR is merged.
+> Historic PR-documentation is not maintained along with new PRs — treat it as a snapshot, not as current documentation.
+
+## The Problem
+
+`init --systemd` generates the host integration — the systemd unit's resource limits, the Apache `.htaccess` and the maintenance page — from the effective configuration.
+It read that configuration through a helper with two independent defects, both of which fail silently.
+
+**It swallowed every error.**
+The load sat in `try { … } catch (_: Exception) { ServerConfig() }`.
+Any configuration error at all — a missing required field, a malformed layer, a version floor violation — produced a default `ServerConfig` with a blank `publicBaseUrl`.
+A repository with a broken `.werkator.yml` then looked exactly like one that simply has no public base URL configured:
+the `.htaccess` and the maintenance page were skipped without a word.
+This surfaced while verifying [PR#17](2026-09-03-PR%2317-maintenance-page.md) on mih09, where the missing files looked like an unconfigured `publicBaseUrl` and were in fact an unrelated validation error.
+
+**It read from the wrong directory.**
+The helper called `configLoader.load(Paths.get("."))` — the process's current directory — while everything else in the command works off the git top level resolved by `GitService.getTopLevel`.
+`ConfigLoader.loadRaw` resolves the layers directly under the directory it is given and does not walk up to the repository root, so the two agree only when `init` happens to be invoked from the root itself.
+From a subdirectory the command read another repository's configuration, or none.
+That also broke `--apply`: the fragment is installed into the repository root deliberately before the systemd files are written, so that its port and limits reach the generated unit, and a current-directory read does not see it.
+
+`init --systemd` runs during initial deployment setup, which is exactly when a silent wrong answer is most expensive.
+
+## Non-Goals
+
+- The fallback itself is kept: a configuration that cannot be loaded is not fatal for `init`, the units are still generated with the defaults.
+  During the very first bootstrap there is legitimately nothing to load yet.
+- No change to `ConfigLoader`, to the configuration schema, or to any other command.
+- No sweep for catch-all exception handlers elsewhere in the code base;
+  the two other `catch` blocks in `InitCommand` already print an `Error:` and abort, so they were only checked, not changed.
+
+## The Scenarios
+
+### Feature: init reports what it read and where it read it from
+
+#### Background
+
+- The *repository root* is the git top level as resolved by `GitService.getTopLevel`, the directory holding `.werkator.yml`, `.git/werkator/.werkator.yml` and an applied fragment.
+- The *current directory* is the process working directory, which is the repository root only when `init` is invoked there.
+
+#### Scenario#22.01: A broken configuration is named, not defaulted over
+
+So that a validation error during deployment setup is not mistaken for an unconfigured installation.
+
+- **Given** a repository whose effective configuration cannot be loaded
+- **When** `init --systemd` runs
+- **Then** the exception message is printed as a warning
+  - **and** the unit files are still generated with the default settings
+  - **and** the warning appears exactly once, although three settings are read from the configuration
+
+##### Verified by
+
+- [InitCommandTest: `--systemd warns once when the effective configuration cannot be loaded`](../../src/test/kotlin/de/hoennig/werkator/commands/InitCommandTest.kt)
+
+#### Scenario#22.02: The configuration is read from the repository root
+
+So that the generated host integration reflects the repository being initialized, whatever directory `init` was invoked from.
+
+- **Given** a repository whose root configuration sets `server.publicBaseUrl` and `server.port`
+- **and** a current directory that is not that repository root
+- **When** `init --systemd` runs
+- **Then** the `.htaccess` and the maintenance page are generated
+  - **and** the `.htaccess` proxies to the port from the root configuration
+
+##### Verified by
+
+- [InitCommandTest: `--systemd reads the configuration from the repository root, not the current directory`](../../src/test/kotlin/de/hoennig/werkator/commands/InitCommandTest.kt)
+
+## The Solution
+
+The catch-all now prints the exception message before falling back:
+
+```
+Warning: the effective configuration could not be loaded (<message>)
+  continuing with default server settings — check the generated unit and host files
+```
+
+The configuration is read three times while the systemd files are written (`memoryMax`, `tasksMax`, `publicBaseUrl`), which would repeat the warning three times.
+It is therefore loaded once per run and cached in the command, and the cache is reset at the top of `run()` so a reused instance — the command is a Spring singleton — re-reads.
+
+The repository root is passed down into the two accessors instead of `Paths.get(".")`.
+This matches every other caller of `ConfigLoader.load` in the code base, all of which pass an explicit working directory;
+`InitCommand` was the only one relying on the process's current directory.
+
+Both fixes are the same failure in two forms — the command answered from a configuration it never actually read — which is why they are in one PR.
+
+## Additional Changes
+
+- None.

src/main/kotlin/de/hoennig/werkator/build/BuildRunner.kt

@@ -43,17 +43,17 @@ class ProcessBuildRunner : BuildRunner {
 }
 
 /**
- * Selects the runtime per branch: Docker when `branches.<name>.docker.enabled`,
- * bubblewrap when `branches.<name>.bwrap.enabled`, native shell execution otherwise
- * (the unchanged default). Docker and bwrap are mutually exclusive per branch and are
- * rejected together at config load, so the branch order here never has to "pick".
+ * Selects the runtime per branch: Docker when `builds.<name>.docker.enabled`, the
+ * werkdock sandbox when `builds.<name>.werkdock.enabled`, native shell execution
+ * otherwise (the unchanged default). Docker and werkdock are mutually exclusive per
+ * branch and are rejected together at config load, so the order here never has to "pick".
  */
 @Primary
 @Component
 class DispatchingBuildRunner(
     private val processBuildRunner: ProcessBuildRunner,
     private val dockerBuildRunner: DockerBuildRunner,
-    private val bwrapBuildRunner: BwrapBuildRunner,
+    private val werkdockBuildRunner: WerkdockBuildRunner,
 ) : BuildRunner {
     override fun start(
         command: String,
@@ -66,7 +66,7 @@ class DispatchingBuildRunner(
         val runner =
             when {
                 branchConfig.docker.enabled -> dockerBuildRunner
-                branchConfig.bwrap.enabled -> bwrapBuildRunner
+                branchConfig.werkdock.enabled -> werkdockBuildRunner
                 else -> processBuildRunner
             }
         return runner.start(command, workingDir, environment, repoDir, branchConfig, onAuxProcess)

src/main/kotlin/de/hoennig/werkator/build/WerkdockBuildRunner.kt

@@ -1,7 +1,7 @@
 package de.hoennig.werkator.build
 
 import de.hoennig.werkator.config.BranchConfig
-import de.hoennig.werkator.config.BwrapConfig
+import de.hoennig.werkator.config.WerkdockConfig
 import de.hoennig.werkator.git.GitCommandRunner
 import org.slf4j.LoggerFactory
 import org.springframework.stereotype.Component
@@ -13,7 +13,7 @@ import java.security.MessageDigest
  * Runs build commands inside a bubblewrap user-namespace sandbox (Step 17 / ADR 0008),
  * for hosts without root and without a Docker daemon (e.g. Hostsharing managed
  * webspaces). Since step 21 session C it no longer assembles the raw `bwrap` argv:
- * it shells out to the `werkdock` CLI (`bwrap.werkdock`, default via PATH) — the same
+ * it shells out to the `werkdock` CLI (`werkdock.binary`, default via PATH) — the same
  * pattern as git and docker, CLI, no library.
  *
  * The rootfs archive becomes a werkdock *image*, loaded once per source
@@ -36,10 +36,10 @@ import java.security.MessageDigest
  * native builds.
  */
 @Component
-class BwrapBuildRunner(
+class WerkdockBuildRunner(
     private val commandRunner: GitCommandRunner,
 ) : BuildRunner {
-    private val log = LoggerFactory.getLogger(BwrapBuildRunner::class.java)
+    private val log = LoggerFactory.getLogger(WerkdockBuildRunner::class.java)
 
     /** Replaceable process launcher so unit tests can capture the assembled `werkdock` argv. */
     internal var processStarter: (List<String>, Path) -> Process = { command, dir ->
@@ -54,14 +54,14 @@ class BwrapBuildRunner(
         branchConfig: BranchConfig,
         onAuxProcess: (Process) -> Unit,
     ): Process {
-        val bwrap = branchConfig.bwrap
-        require(bwrap.rootfs.isNotBlank()) { "branches.<name>.bwrap.rootfs must be set when bwrap.enabled is true" }
-        val werkdock = bwrap.werkdock.ifBlank { "werkdock" }
-        val image = imageName(bwrap.rootfs)
-        ensureImage(werkdock, image, bwrap, repoDir, onAuxProcess)
+        val sandbox = branchConfig.werkdock
+        require(sandbox.rootfs.isNotBlank()) { "builds.<name>.werkdock.rootfs must be set when werkdock.enabled is true" }
+        val werkdock = sandbox.binary.ifBlank { "werkdock" }
+        val image = imageName(sandbox.rootfs)
+        ensureImage(werkdock, image, sandbox, repoDir, onAuxProcess)
         val homeDir = repoDir.resolve(BUILDENV_DIR).resolve(HOME_DIR)
         Files.createDirectories(homeDir)
-        val args = invocation(command, workingDir, environment, repoDir, bwrap, werkdock, image, homeDir)
+        val args = invocation(command, workingDir, environment, repoDir, sandbox, werkdock, image, homeDir)
         return processStarter(args, repoDir)
     }
 
@@ -73,7 +73,7 @@ class BwrapBuildRunner(
     private fun ensureImage(
         werkdock: String,
         image: String,
-        bwrap: BwrapConfig,
+        sandbox: WerkdockConfig,
         repoDir: Path,
         onAuxProcess: (Process) -> Unit,
     ) {
@@ -81,10 +81,10 @@ class BwrapBuildRunner(
         if (image in loaded) {
             return
         }
-        val envDir = repoDir.resolve(BUILDENV_DIR).resolve(sourceKey(bwrap.rootfs))
+        val envDir = repoDir.resolve(BUILDENV_DIR).resolve(sourceKey(sandbox.rootfs))
         Files.createDirectories(envDir)
-        val archive = localArchive(bwrap.rootfs, envDir, repoDir, onAuxProcess)
-        log.info("loading build environment {} as werkdock image {}", bwrap.rootfs, image)
+        val archive = localArchive(sandbox.rootfs, envDir, repoDir, onAuxProcess)
+        log.info("loading build environment {} as werkdock image {}", sandbox.rootfs, image)
         commandRunner.runOrThrow(
             listOf(werkdock, "load", "-i", archive, "--name", image),
             repoDir,
@@ -93,7 +93,7 @@ class BwrapBuildRunner(
     }
 
     /**
-     * Resolves [BwrapConfig.rootfs] to a local archive path: a bare or `file:` path is
+     * Resolves [WerkdockConfig.rootfs] to a local archive path: a bare or `file:` path is
      * used as-is; an `http(s)` URL is downloaded once into the buildenv cache.
      */
     private fun localArchive(
@@ -123,7 +123,7 @@ class BwrapBuildRunner(
         workspace: Path,
         environment: Map<String, String>,
         repoDir: Path,
-        bwrap: BwrapConfig,
+        sandbox: WerkdockConfig,
         werkdock: String,
         image: String,
         homeDir: Path,
@@ -148,7 +148,7 @@ class BwrapBuildRunner(
         for ((key, value) in environment) {
             args += listOf("-e", "$key=$value")
         }
-        for ((key, value) in bwrap.env) {
+        for ((key, value) in sandbox.env) {
             args += listOf("-e", "$key=$value")
         }
         args += listOf("-w", "$workspaceAbs")

src/main/kotlin/de/hoennig/werkator/commands/InitCommand.kt

@@ -48,6 +48,7 @@ class InitCommand(
     internal var javaExecutableResolver: () -> Path = { Paths.get(System.getProperty("java.home"), "bin", "java") }
 
     override fun run() {
+        cachedServerConfig = null
         val normalizedWorkingDir = workingDir.toAbsolutePath().normalize()
         val root =
             try {
@@ -242,12 +243,13 @@ class InitCommand(
                   context: "."          # Docker build context used with dockerfile
                   network: ""           # Docker network mode for the build container; empty = Docker default (pinned)
                   env: {}               # additional environment variables set inside the build container
-                # bubblewrap user-namespace sandbox — for hosts without root and without a
-                # Docker daemon (e.g. Hostsharing managed webspaces). Mutually exclusive with docker.
-                bwrap:
-                  enabled: false        # run clean/build in a bwrap sandbox instead of natively (pinned)
+                # werkdock sandbox (bubblewrap user namespace) — for hosts without root and
+                # without a Docker daemon (e.g. Hostsharing managed webspaces). Mutually
+                # exclusive with docker. Called bwrap before v1.2.0, still read under that name.
+                werkdock:
+                  enabled: false        # run clean/build in the sandbox instead of natively (pinned)
                   rootfs: ""            # prepared rootfs archive (path or URL); required when enabled (pinned)
-                  werkdock: werkdock    # the werkdock CLI executing the sandbox; default resolves via PATH (pinned)
+                  binary: werkdock      # the werkdock CLI executing the sandbox; default resolves via PATH (pinned)
                   env: {}               # additional environment variables set inside the sandbox
                 # Gitea check this build reports as; empty uses gitea.statusContext.
                 # Two builds of one commit under the same context overwrite each other.
@@ -295,14 +297,31 @@ class InitCommand(
      * already loadable (re-running `init --systemd` on an installed instance); during
      * the very first bootstrap they stay unset and the defaults (no directives) apply.
      */
-    private fun loadedSystemdConfig(): de.hoennig.werkator.config.SystemdConfig = loadedServerConfig().systemd
+    private fun loadedSystemdConfig(root: Path): de.hoennig.werkator.config.SystemdConfig = loadedServerConfig(root).systemd
 
-    private fun loadedServerConfig(): de.hoennig.werkator.config.ServerConfig =
-        try {
-            configLoader.load(Paths.get(".")).server
-        } catch (_: Exception) {
-            de.hoennig.werkator.config
-                .ServerConfig()
+    /** Loaded once per run, so a broken configuration is reported once and not per caller. */
+    private var cachedServerConfig: de.hoennig.werkator.config.ServerConfig? = null
+
+    /**
+     * Read from the repository root like every other file this command touches — the
+     * layers sit there, not in whatever directory the process happens to run in, and
+     * an applied fragment must reach the generated unit even when `init` is invoked
+     * from a subdirectory.
+     *
+     * A configuration error here is not fatal — the units are still generated with defaults —
+     * but it must not pass for "nothing configured": without the warning a broken `.werkator.yml`
+     * looks exactly like an unset `publicBaseUrl` and the host integration is skipped silently.
+     */
+    private fun loadedServerConfig(root: Path): de.hoennig.werkator.config.ServerConfig =
+        cachedServerConfig ?: run {
+            try {
+                configLoader.load(root).server
+            } catch (e: Exception) {
+                println("Warning: the effective configuration could not be loaded (${e.message})")
+                println("  continuing with default server settings — check the generated unit and host files")
+                de.hoennig.werkator.config
+                    .ServerConfig()
+            }.also { cachedServerConfig = it }
         }
 
     private fun createSystemdFiles(
@@ -326,8 +345,8 @@ class InitCommand(
                 javaExecutable = javaExecutableResolver(),
                 jarPath = jarPath,
                 envFile = envFile,
-                memoryMax = loadedSystemdConfig().memoryMax,
-                tasksMax = loadedSystemdConfig().tasksMax,
+                memoryMax = loadedSystemdConfig(root).memoryMax,
+                tasksMax = loadedSystemdConfig(root).tasksMax,
             ),
         )
         println("created ${unitFile.toFile().relativeTo(normalizedWorkingDir.toFile())}")
@@ -350,7 +369,7 @@ class InitCommand(
 
         // generated host integration like the units: only meaningful behind a web
         // frontend, so it needs a public base URL; unused elsewhere and harmless
-        val server = loadedServerConfig()
+        val server = loadedServerConfig(root)
         if (server.publicBaseUrl.isNotBlank()) {
             val htaccessFile = werkatorDir.resolve(SystemdServiceFiles.HTACCESS_NAME)
             htaccessFile.toFile().writeText(SystemdServiceFiles.htaccessContent(server.port))

src/main/kotlin/de/hoennig/werkator/config/BuildDefinition.kt

@@ -42,8 +42,8 @@ data class BuildDefinition(
     val statusContext: String? = null,
     /** Overrides of the docker settings; null inherits them. */
     val docker: DockerOverrides? = null,
-    /** Overrides of the bwrap settings; null inherits them. */
-    val bwrap: BwrapOverrides? = null,
+    /** Overrides of the werkdock settings; null inherits them. */
+    val werkdock: WerkdockOverrides? = null,
 ) {
     /** The settings this build runs with: [branchConfig] with this definition applied; unset values fall through. */
     fun applyTo(branchConfig: BranchConfig): BranchConfig =
@@ -64,12 +64,12 @@ data class BuildDefinition(
                     network = docker?.network ?: branchConfig.docker.network,
                     env = docker?.env ?: branchConfig.docker.env,
                 ),
-            bwrap =
-                branchConfig.bwrap.copy(
-                    enabled = bwrap?.enabled ?: branchConfig.bwrap.enabled,
-                    rootfs = bwrap?.rootfs ?: branchConfig.bwrap.rootfs,
-                    werkdock = bwrap?.werkdock ?: branchConfig.bwrap.werkdock,
-                    env = bwrap?.env ?: branchConfig.bwrap.env,
+            werkdock =
+                branchConfig.werkdock.copy(
+                    enabled = werkdock?.enabled ?: branchConfig.werkdock.enabled,
+                    rootfs = werkdock?.rootfs ?: branchConfig.werkdock.rootfs,
+                    binary = werkdock?.binary ?: branchConfig.werkdock.binary,
+                    env = werkdock?.env ?: branchConfig.werkdock.env,
                 ),
         )
 
@@ -169,13 +169,13 @@ data class DockerOverrides(
     val env: Map<String, String>? = null,
 )
 
-/** Nullable bubblewrap overrides of a [BuildDefinition]; null values inherit the branch's setting. */
-data class BwrapOverrides(
-    /** Run the build in the bwrap sandbox instead of natively. Pinned — a branch must not escape its sandbox. */
+/** Nullable werkdock overrides of a [BuildDefinition]; null values inherit the branch's setting. */
+data class WerkdockOverrides(
+    /** Run the build in the sandbox instead of natively. Pinned — a branch must not escape its sandbox. */
     val enabled: Boolean? = null,
     /** Rootfs archive source. Pinned — a branch must not substitute a foreign rootfs. */
     val rootfs: String? = null,
     /** The werkdock CLI executing the sandbox. Pinned — a branch must not substitute the executing binary. */
-    val werkdock: String? = null,
+    val binary: String? = null,
     val env: Map<String, String>? = null,
 )

src/main/kotlin/de/hoennig/werkator/config/ConfigLoader.kt

@@ -201,10 +201,10 @@ class ConfigLoader(
             val strippedDocker = docker.toMutableMap().apply { PINNED_DOCKER_KEYS.forEach { remove(it) } }
             if (strippedDocker.isEmpty()) result.remove("docker") else result["docker"] = strippedDocker
         }
-        val bwrap = entry["bwrap"] as? Map<String, Any?>
-        if (bwrap != null) {
-            val strippedBwrap = bwrap.toMutableMap().apply { PINNED_BWRAP_KEYS.forEach { remove(it) } }
-            if (strippedBwrap.isEmpty()) result.remove("bwrap") else result["bwrap"] = strippedBwrap
+        val werkdock = entry["werkdock"] as? Map<String, Any?>
+        if (werkdock != null) {
+            val strippedWerkdock = werkdock.toMutableMap().apply { PINNED_WERKDOCK_KEYS.forEach { remove(it) } }
+            if (strippedWerkdock.isEmpty()) result.remove("werkdock") else result["werkdock"] = strippedWerkdock
         }
         return result
     }
@@ -481,14 +481,62 @@ class ConfigLoader(
     private fun loadFile(file: File): Map<String, Any?> {
         if (!file.exists()) return emptyMap()
         @Suppress("UNCHECKED_CAST")
-        return yaml.readValue(file, Map::class.java) as Map<String, Any?>
+        return renameLegacySandbox(yaml.readValue(file, Map::class.java) as Map<String, Any?>, file.toString())
     }
 
     /** Parses a `.werkator.yml` read from git (not from disk); blank or null yields no layer. */
     private fun parseYaml(text: String?): Map<String, Any?> {
         if (text.isNullOrBlank()) return emptyMap()
         @Suppress("UNCHECKED_CAST")
-        return yaml.readValue(text, Map::class.java) as? Map<String, Any?> ?: emptyMap()
+        val raw = yaml.readValue(text, Map::class.java) as? Map<String, Any?> ?: emptyMap()
+        return renameLegacySandbox(raw, "the branch configuration")
+    }
+
+    /**
+     * Reads the pre-PR#19 `bwrap` section under its new name `werkdock`, including its
+     * `werkdock` key which is `binary` now. Done on the raw map of every layer, before
+     * merging, so nothing downstream — merging, pinning, binding — knows two names.
+     *
+     * Renaming rather than rejecting: the section is written in the machine configuration
+     * of every webspace instance, which no repository tracks. The warning is what makes
+     * the old name go away; the hard refusal belongs to the release that sets
+     * [ConfigVersions.FORMAT_BROKE_IN], where a file declaring no version can be caught
+     * by name at all.
+     */
+    @Suppress("UNCHECKED_CAST")
+    private fun renameLegacySandbox(
+        raw: Map<String, Any?>,
+        source: String,
+    ): Map<String, Any?> {
+        var renamed = false
+        val result =
+            raw.mapValues { (section, value) ->
+                if (section != "builds" && section != "branches") {
+                    return@mapValues value
+                }
+                val entries = value as? Map<String, Any?> ?: return@mapValues value
+                entries.mapValues inner@{ (_, entry) ->
+                    val settings = entry as? Map<String, Any?> ?: return@inner entry
+                    val legacy = settings["bwrap"] as? Map<String, Any?> ?: return@inner entry
+                    renamed = true
+                    val moved =
+                        legacy.mapKeys { (key, _) -> if (key == "werkdock") "binary" else key }
+                    val existing = settings["werkdock"] as? Map<String, Any?> ?: emptyMap()
+                    settings.toMutableMap().apply {
+                        remove("bwrap")
+                        // an explicit werkdock section wins: the new name is the one meant
+                        put("werkdock", moved + existing)
+                    }
+                }
+            }
+        if (renamed && warnedSections.add("bwrap-renamed:$source")) {
+            log.warn(
+                "reading the 'bwrap' section of {} as 'werkdock' (and 'bwrap.werkdock' as 'werkdock.binary'); " +
+                    "rename it — the old name goes away with the next breaking configuration change",
+                source,
+            )
+        }
+        return result
     }
 
     @Suppress("UNCHECKED_CAST")
@@ -550,8 +598,8 @@ class ConfigLoader(
         /** `docker` keys a branch must never override: the sandbox policy. */
         private val PINNED_DOCKER_KEYS = setOf("enabled", "network")
 
-        /** `bwrap` keys a branch must never override: the sandbox policy (Step 17) and its executing binary. */
-        private val PINNED_BWRAP_KEYS = setOf("enabled", "rootfs", "werkdock")
+        /** `werkdock` keys a branch must never override: the sandbox policy (Step 17) and its executing binary. */
+        private val PINNED_WERKDOCK_KEYS = setOf("enabled", "rootfs", "binary")
 
         /**
          * The one key of a build definition that says *when* and *for which branches* it

src/main/kotlin/de/hoennig/werkator/config/WerkatorConfig.kt

@@ -38,9 +38,9 @@ data class WerkatorConfig(
     ): BranchConfig {
         val branchConfig = branches[branch] ?: branches["default"] ?: BranchConfig()
         val settings = effectiveBuildDefinitions()[build]?.applyTo(branchConfig) ?: branchConfig
-        if (settings.docker.enabled && settings.bwrap.enabled) {
+        if (settings.docker.enabled && settings.werkdock.enabled) {
             throw IllegalArgumentException(
-                "builds.$build on '$branch' enables both docker and bwrap; a build runs in exactly one sandbox. " +
+                "builds.$build on '$branch' enables both docker and werkdock; a build runs in exactly one sandbox. " +
                     "Disable one of them.",
             )
         }
@@ -179,17 +179,22 @@ data class BranchConfig(
     val statusContext: String = "",
     val autoBuild: AutoBuildConfig = AutoBuildConfig(),
     val docker: DockerConfig = DockerConfig(),
-    /** bubblewrap user-namespace sandbox; mutually exclusive with [docker]. */
-    val bwrap: BwrapConfig = BwrapConfig(),
+    /** werkdock sandbox (bubblewrap user namespace); mutually exclusive with [docker]. */
+    val werkdock: WerkdockConfig = WerkdockConfig(),
 )
 
 /**
- * bubblewrap build sandbox (Step 17): runs the build in an unprivileged user namespace
- * with a prepared Debian root filesystem. For hosts without root and without a Docker
- * daemon (e.g. Hostsharing managed webspaces); see `docs/plan/17-bwrap-build-runtime.md`.
+ * The werkdock build sandbox (Step 17, executed by the werkdock CLI since step 21):
+ * runs the build in an unprivileged bubblewrap user namespace over a prepared Debian
+ * root filesystem. For hosts without root and without a Docker daemon (e.g. Hostsharing
+ * managed webspaces); see `docs/plan/17-bwrap-build-runtime.md`.
+ *
+ * The section was called `bwrap` until PR#19 and is still read under that name, with a
+ * warning: `bwrap` named the mechanism one layer below the tool that actually runs it,
+ * which made `bwrap.werkdock` the key naming its own executor.
  */
-data class BwrapConfig(
-    /** Run the clean and build commands in a bwrap sandbox instead of natively. */
+data class WerkdockConfig(
+    /** Run the clean and build commands in the sandbox instead of natively. */
     val enabled: Boolean = false,
     /**
      * Path or URL of the prepared rootfs archive (e.g. `werkator-buildenv-trixie-java21.tar.zst`),
@@ -200,8 +205,9 @@ data class BwrapConfig(
     /**
      * The werkdock CLI executing the sandbox (step 21 session C); empty or the default
      * resolves via PATH. Pinned — a branch must not substitute the executing binary.
+     * Was `bwrap.werkdock` until PR#19.
      */
-    val werkdock: String = "werkdock",
+    val binary: String = "werkdock",
     /** Additional environment variables set inside the sandbox. */
     val env: Map<String, String> = emptyMap(),
 )

src/main/resources/templates/releases.html

@@ -7,6 +7,16 @@
     <div th:replace="~{fragments :: nav(${view})}"></div>
     <div class="panel release-notes">
 
+        <h2>v1.2.0 <span class="muted">— 2026-09-03</span></h2>
+        <ul>
+            <li>The build sandbox for hosts without Docker is configured as <code>werkdock</code> now,
+                not <code>bwrap</code> (PR#19), and its <code>bwrap.werkdock</code> key — which named its
+                own executor — is <code>werkdock.binary</code>. The old section is still read, with a
+                warning naming the file, so no installation has to be changed before its next
+                configuration edit. <code>bwrap</code> named the mechanism one layer below the tool that
+                actually runs it: builds have been executed by the werkdock CLI since v1.0.0.</li>
+        </ul>
+
         <h2>v1.1.2 <span class="muted">— 2026-09-03</span></h2>
         <ul>
             <li>On a Hostsharing Managed Webspace, an <code>instance-update</code> restart no longer looks

src/test/kotlin/de/hoennig/werkator/build/BuildExecutorTest.kt

@@ -505,6 +505,8 @@ class BuildExecutorTest : FunSpec() {
         }
 
         test("with maxConcurrent 1 a second branch stays PENDING until the first finished") {
+            // branch-a blocks on a gate file the test creates, so the PENDING assertion
+            // below cannot race the first build finishing on a loaded machine
             val h =
                 Harness(
                     """
@@ -512,7 +514,7 @@ class BuildExecutorTest : FunSpec() {
                       maxConcurrent: 1
                     branches:
                       branch-a:
-                        buildCommand: "sleep 1"
+                        buildCommand: "until [ -f gate ]; do sleep 0.05; done"
                         cleanCommand: ""
                       branch-b:
                         buildCommand: "echo ok"
@@ -523,8 +525,13 @@ class BuildExecutorTest : FunSpec() {
             h.executor.startBuild(h.repo, "branch-a", "sha-a")
             h.executor.startBuild(h.repo, "branch-b", "sha-b")
 
+            eventually(30.seconds) {
+                h.repository.latestFor("branch-a")?.status shouldBe BuildStatus.RUNNING
+            }
             h.repository.latestFor("branch-b")?.status shouldBe BuildStatus.PENDING
 
+            Files.createFile(h.workingDir.resolve("gate"))
+
             awaitStatus(h, "branch-b", BuildStatus.SUCCESS)
             awaitStatus(h, "branch-a", BuildStatus.SUCCESS)
             val transitions = h.events.map { it.result.branch to it.result.status }

src/test/kotlin/de/hoennig/werkator/build/DispatchingBuildRunnerTest.kt

@@ -1,8 +1,8 @@
 package de.hoennig.werkator.build
 
 import de.hoennig.werkator.config.BranchConfig
-import de.hoennig.werkator.config.BwrapConfig
 import de.hoennig.werkator.config.DockerConfig
+import de.hoennig.werkator.config.WerkdockConfig
 import io.kotest.core.spec.style.FunSpec
 import io.kotest.matchers.shouldBe
 import io.mockk.Called
@@ -15,13 +15,13 @@ import java.nio.file.Paths
 class DispatchingBuildRunnerTest : FunSpec() {
     private val processBuildRunner = mockk<ProcessBuildRunner>()
     private val dockerBuildRunner = mockk<DockerBuildRunner>()
-    private val bwrapBuildRunner = mockk<BwrapBuildRunner>()
-    private val dispatcher = DispatchingBuildRunner(processBuildRunner, dockerBuildRunner, bwrapBuildRunner)
+    private val werkdockBuildRunner = mockk<WerkdockBuildRunner>()
+    private val dispatcher = DispatchingBuildRunner(processBuildRunner, dockerBuildRunner, werkdockBuildRunner)
     private val process = mockk<Process>()
     private val dir = Paths.get(".")
 
     init {
-        beforeEach { clearMocks(processBuildRunner, dockerBuildRunner, bwrapBuildRunner) }
+        beforeEach { clearMocks(processBuildRunner, dockerBuildRunner, werkdockBuildRunner) }
 
         test("runs natively by default") {
             val branchConfig = BranchConfig()
@@ -30,7 +30,7 @@ class DispatchingBuildRunnerTest : FunSpec() {
             dispatcher.start("cmd", dir, emptyMap(), dir, branchConfig) shouldBe process
 
             verify { dockerBuildRunner wasNot Called }
-            verify { bwrapBuildRunner wasNot Called }
+            verify { werkdockBuildRunner wasNot Called }
         }
 
         test("runs in Docker when the branch enables it") {
@@ -40,12 +40,12 @@ class DispatchingBuildRunnerTest : FunSpec() {
             dispatcher.start("cmd", dir, emptyMap(), dir, branchConfig) shouldBe process
 
             verify { processBuildRunner wasNot Called }
-            verify { bwrapBuildRunner wasNot Called }
+            verify { werkdockBuildRunner wasNot Called }
         }
 
-        test("runs in bwrap when the branch enables it (and not Docker)") {
-            val branchConfig = BranchConfig(bwrap = BwrapConfig(enabled = true, rootfs = "/srv/buildenv.tar.zst"))
-            every { bwrapBuildRunner.start("cmd", dir, emptyMap(), dir, branchConfig) } returns process
+        test("runs in the werkdock sandbox when the branch enables it (and not Docker)") {
+            val branchConfig = BranchConfig(werkdock = WerkdockConfig(enabled = true, rootfs = "/srv/buildenv.tar.zst"))
+            every { werkdockBuildRunner.start("cmd", dir, emptyMap(), dir, branchConfig) } returns process
 
             dispatcher.start("cmd", dir, emptyMap(), dir, branchConfig) shouldBe process
 

src/test/kotlin/de/hoennig/werkator/build/WerkdockBuildRunnerTest.kt

@@ -1,7 +1,7 @@
 package de.hoennig.werkator.build
 
 import de.hoennig.werkator.config.BranchConfig
-import de.hoennig.werkator.config.BwrapConfig
+import de.hoennig.werkator.config.WerkdockConfig
 import de.hoennig.werkator.git.GitCommandResult
 import de.hoennig.werkator.git.GitCommandRunner
 import io.kotest.assertions.throwables.shouldThrow
@@ -15,20 +15,20 @@ import io.mockk.verify
 import java.nio.file.Files
 import java.nio.file.Path
 
-class BwrapBuildRunnerTest : FunSpec() {
+class WerkdockBuildRunnerTest : FunSpec() {
     private val commandRunner = mockk<GitCommandRunner>()
-    private lateinit var runner: BwrapBuildRunner
+    private lateinit var runner: WerkdockBuildRunner
     private lateinit var repoDir: Path
     private lateinit var workspace: Path
     private val captured = mutableListOf<List<String>>()
 
-    private fun bwrapBranchConfig(
+    private fun werkdockBranchConfig(
         rootfs: String = "/srv/buildenv.tar.zst",
         env: Map<String, String> = emptyMap(),
     ): BranchConfig =
         BranchConfig(
-            bwrap =
-                BwrapConfig(
+            werkdock =
+                WerkdockConfig(
                     enabled = true,
                     rootfs = rootfs,
                     env = env,
@@ -52,9 +52,9 @@ class BwrapBuildRunnerTest : FunSpec() {
         beforeEach {
             clearMocks(commandRunner)
             captured.clear()
-            repoDir = Files.createTempDirectory("werkator-bwrap-runner")
+            repoDir = Files.createTempDirectory("werkator-werkdock-runner")
             workspace = repoDir.resolve("workspace")
-            runner = BwrapBuildRunner(commandRunner)
+            runner = WerkdockBuildRunner(commandRunner)
             runner.processStarter = { command, _ ->
                 captured += command
                 ProcessBuilder("true").start()
@@ -64,7 +64,7 @@ class BwrapBuildRunnerTest : FunSpec() {
         test("assembles the exact werkdock run command for a loaded image") {
             givenImageLoaded()
 
-            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, bwrapBranchConfig())
+            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, werkdockBranchConfig())
 
             captured.single() shouldBe
                 listOf(
@@ -99,7 +99,7 @@ class BwrapBuildRunnerTest : FunSpec() {
                 )
             } returns GitCommandResult(0, "", "")
 
-            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, bwrapBranchConfig())
+            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, werkdockBranchConfig())
 
             verify {
                 commandRunner.runOrThrow(
@@ -114,7 +114,7 @@ class BwrapBuildRunnerTest : FunSpec() {
         test("does not load an image werkdock already has") {
             givenImageLoaded()
 
-            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, bwrapBranchConfig())
+            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, werkdockBranchConfig())
 
             verify(exactly = 0) { commandRunner.runOrThrow(match { "load" in it }, any(), any(), any()) }
         }
@@ -124,7 +124,7 @@ class BwrapBuildRunnerTest : FunSpec() {
                 GitCommandResult(0, imageName() + "\n", "")
             val branchConfig =
                 BranchConfig(
-                    bwrap = BwrapConfig(enabled = true, rootfs = "/srv/buildenv.tar.zst", werkdock = "/opt/bin/werkdock"),
+                    werkdock = WerkdockConfig(enabled = true, rootfs = "/srv/buildenv.tar.zst", binary = "/opt/bin/werkdock"),
                 )
 
             runner.start("./gradlew test", workspace, emptyMap(), repoDir, branchConfig)
@@ -136,7 +136,7 @@ class BwrapBuildRunnerTest : FunSpec() {
             givenImageLoaded()
             val relativeWorkspace = repoDir.relativize(workspace)
 
-            runner.start("./gradlew test", relativeWorkspace, mapOf("branch" to "main"), repoDir, bwrapBranchConfig())
+            runner.start("./gradlew test", relativeWorkspace, mapOf("branch" to "main"), repoDir, werkdockBranchConfig())
 
             val args = captured.single()
             val absolute = workspace.toAbsolutePath().normalize().toString()
@@ -145,7 +145,7 @@ class BwrapBuildRunnerTest : FunSpec() {
             args.count { it == "$absolute:$absolute" } shouldBe 1
         }
 
-        test("adds bwrap env after the branch environment") {
+        test("adds the sandbox env after the branch environment") {
             givenImageLoaded()
 
             runner.start(
@@ -153,7 +153,7 @@ class BwrapBuildRunnerTest : FunSpec() {
                 workspace,
                 mapOf("branch" to "main"),
                 repoDir,
-                bwrapBranchConfig(env = mapOf("FOO" to "bar")),
+                werkdockBranchConfig(env = mapOf("FOO" to "bar")),
             )
 
             val args = captured.single()
@@ -171,7 +171,7 @@ class BwrapBuildRunnerTest : FunSpec() {
             Files.writeString(workspace.resolve(".git"), "gitdir: $adminDir\n")
             givenImageLoaded()
 
-            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, bwrapBranchConfig())
+            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, werkdockBranchConfig())
 
             val args = captured.single()
             args[args.indexOf("$gitDir:$gitDir:ro") - 1] shouldBe "-v"
@@ -190,7 +190,7 @@ class BwrapBuildRunnerTest : FunSpec() {
             givenImageLoaded()
             Files.createDirectories(workspace)
 
-            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, bwrapBranchConfig())
+            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, werkdockBranchConfig())
 
             val args = captured.single()
             val gitDir = repoDir.resolve(".git")
@@ -199,21 +199,21 @@ class BwrapBuildRunnerTest : FunSpec() {
         }
 
         test("fails without a configured rootfs") {
-            val branchConfig = BranchConfig(bwrap = BwrapConfig(enabled = true))
+            val branchConfig = BranchConfig(werkdock = WerkdockConfig(enabled = true))
 
             val exception =
                 shouldThrow<IllegalArgumentException> {
                     runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, branchConfig)
                 }
 
-            exception.message shouldContain "bwrap.rootfs"
+            exception.message shouldContain "werkdock.rootfs"
         }
 
         test("downloads a URL rootfs once before loading it") {
             val url = "https://example.test/buildenv.tar.zst"
             val downloadTarget =
                 repoDir
-                    .resolve(BwrapBuildRunner.BUILDENV_DIR)
+                    .resolve(WerkdockBuildRunner.BUILDENV_DIR)
                     .resolve(url.sha12())
                     .resolve("buildenv.tar.zst")
             givenImageMissing()
@@ -222,7 +222,7 @@ class BwrapBuildRunnerTest : FunSpec() {
             every { commandRunner.runOrThrow(match { "load" in it }, any(), any(), any()) } returns
                 GitCommandResult(0, "", "")
 
-            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, bwrapBranchConfig(rootfs = url))
+            runner.start("./gradlew test", workspace, mapOf("branch" to "main"), repoDir, werkdockBranchConfig(rootfs = url))
 
             verify {
                 commandRunner.runOrThrow(listOf("curl", "-fsSL", "-o", downloadTarget.toString(), url), repoDir, any(), any())

src/test/kotlin/de/hoennig/werkator/commands/InitCommandTest.kt

@@ -252,5 +252,50 @@ class InitCommandTest : FunSpec() {
             // This should not throw IllegalArgumentException
             initCommand.run()
         }
+
+        test("--systemd reads the configuration from the repository root, not the current directory") {
+            val tempDir = Files.createTempDirectory("werkator-init-test")
+            // written before the run, so `init` keeps it instead of creating a template
+            tempDir.resolve(".werkator.yml").toFile().writeText(
+                "server:\n  publicBaseUrl: \"https://werkator.example.org/\"\n  port: 18099\n",
+            )
+            initCommand.workingDir = tempDir
+            initCommand.systemd = true
+            initCommand.jarPathResolver = { Paths.get("/home/ci/bin/werkator.jar") }
+            initCommand.javaExecutableResolver = { Paths.get("/usr/bin/java") }
+
+            every { gitService.getTopLevel(tempDir) } returns tempDir
+            every { gitService.getOriginUrl(tempDir) } returns "https://git.example.org/my-org/my-repo.git"
+
+            initCommand.run()
+
+            // the host integration is generated only when the root's config has a public base URL
+            val htaccess = tempDir.resolve(".git/werkator/${SystemdServiceFiles.HTACCESS_NAME}")
+            htaccess.toFile().shouldExist()
+            htaccess.toFile().readText() shouldContain "18099"
+            tempDir.resolve(".git/werkator/${SystemdServiceFiles.MAINTENANCE_PAGE_NAME}").toFile().shouldExist()
+        }
+
+        test("--systemd warns once when the effective configuration cannot be loaded") {
+            val tempDir = Files.createTempDirectory("werkator-init-test")
+            val brokenLoader = mockk<de.hoennig.werkator.config.ConfigLoader>()
+            every { brokenLoader.load(any()) } throws IllegalStateException("gitea.owner is required")
+            val command = InitCommand(gitService, brokenLoader)
+            command.workingDir = tempDir
+            command.systemd = true
+            command.jarPathResolver = { Paths.get("/home/ci/bin/werkator.jar") }
+            command.javaExecutableResolver = { Paths.get("/usr/bin/java") }
+
+            every { gitService.getTopLevel(tempDir) } returns tempDir
+            every { gitService.getOriginUrl(tempDir) } returns "https://git.example.org/my-org/my-repo.git"
+
+            val console = captureConsole { command.run() }
+
+            console.stdout shouldContain "gitea.owner is required"
+            // the three readers of the configuration must not repeat the warning
+            console.stdout.windowed("Warning:".length).count { it == "Warning:" } shouldBe 1
+            // the units are still written with the defaults
+            tempDir.resolve(".git/werkator/${SystemdServiceFiles.unitName(tempDir)}").toFile().shouldExist()
+        }
     }
 }

src/test/kotlin/de/hoennig/werkator/config/ConfigLoaderTest.kt

@@ -496,7 +496,7 @@ class ConfigLoaderTest : FunSpec() {
             settings.docker.image shouldBe "attacker-image"
         }
 
-        test("a branch cannot disable its bwrap sandbox or substitute a foreign rootfs through a build definition") {
+        test("the legacy bwrap section is read as werkdock, its werkdock key as binary") {
             val dir = Files.createTempDirectory("werkator-test")
             dir.resolve(".werkator.yml").toFile().writeText(
                 """
@@ -505,6 +505,58 @@ class ConfigLoaderTest : FunSpec() {
                     bwrap:
                       enabled: true
                       rootfs: /host/rootfs.tar.zst
+                      werkdock: /opt/bin/werkdock
+                      env:
+                        FOO: bar
+                """.trimIndent(),
+            )
+
+            val settings = loader.load(dir).buildSettings("any-branch", "default")
+
+            settings.werkdock.enabled shouldBe true
+            settings.werkdock.rootfs shouldBe "/host/rootfs.tar.zst"
+            settings.werkdock.binary shouldBe "/opt/bin/werkdock"
+            settings.werkdock.env shouldBe mapOf("FOO" to "bar")
+        }
+
+        test("a legacy bwrap section on a branch is pinned exactly like the new name") {
+            val dir = Files.createTempDirectory("werkator-test")
+            dir.resolve(".werkator.yml").toFile().writeText(
+                """
+                builds:
+                  default:
+                    werkdock:
+                      enabled: true
+                      rootfs: /host/rootfs.tar.zst
+                """.trimIndent(),
+            )
+            val worktree = Files.createTempDirectory("werkator-test-worktree")
+            // the old name must not become a way around the pinning
+            worktree.resolve(".werkator.yml").toFile().writeText(
+                """
+                builds:
+                  default:
+                    bwrap:
+                      enabled: false
+                      rootfs: /attacker/rootfs.tar.zst
+                """.trimIndent(),
+            )
+
+            val settings = loader.loadForWorktree(dir, worktree).buildSettings("any-branch", "default")
+
+            settings.werkdock.enabled shouldBe true
+            settings.werkdock.rootfs shouldBe "/host/rootfs.tar.zst"
+        }
+
+        test("a branch cannot disable its werkdock sandbox or substitute a foreign rootfs through a build definition") {
+            val dir = Files.createTempDirectory("werkator-test")
+            dir.resolve(".werkator.yml").toFile().writeText(
+                """
+                builds:
+                  default:
+                    werkdock:
+                      enabled: true
+                      rootfs: /host/rootfs.tar.zst
                 """.trimIndent(),
             )
             val worktree = Files.createTempDirectory("werkator-test-worktree")
@@ -512,7 +564,7 @@ class ConfigLoaderTest : FunSpec() {
                 """
                 builds:
                   default:
-                    bwrap:
+                    werkdock:
                       enabled: false
                       rootfs: /attacker/rootfs.tar.zst
                       env:
@@ -523,10 +575,10 @@ class ConfigLoaderTest : FunSpec() {
             val settings = loader.loadForWorktree(dir, worktree).buildSettings("any-branch", "default")
 
             // pinned: the sandbox can neither be switched off nor pointed at a foreign rootfs
-            settings.bwrap.enabled shouldBe true
-            settings.bwrap.rootfs shouldBe "/host/rootfs.tar.zst"
+            settings.werkdock.enabled shouldBe true
+            settings.werkdock.rootfs shouldBe "/host/rootfs.tar.zst"
             // everything that describes the build itself stays the branch's own business
-            settings.bwrap.env shouldBe mapOf("FOO" to "from-branch")
+            settings.werkdock.env shouldBe mapOf("FOO" to "from-branch")
         }
 
         test("a build the branch invents inherits the host's sandbox policy") {
@@ -565,7 +617,7 @@ class ConfigLoaderTest : FunSpec() {
             settings.requirePullRequest shouldBe true
         }
 
-        test("enabling both docker and bwrap on a build is rejected, not picked silently") {
+        test("enabling both docker and werkdock on a build is rejected, not picked silently") {
             val dir = Files.createTempDirectory("werkator-test")
             dir.resolve(".werkator.yml").toFile().writeText(
                 """
@@ -574,7 +626,7 @@ class ConfigLoaderTest : FunSpec() {
                     docker:
                       enabled: true
                       image: build-env
-                    bwrap:
+                    werkdock:
                       enabled: true
                       rootfs: /srv/rootfs.tar.zst
                 """.trimIndent(),
@@ -586,7 +638,7 @@ class ConfigLoaderTest : FunSpec() {
                     config.buildSettings("any-branch", "default")
                 }
 
-            exception.message shouldContain "both docker and bwrap"
+            exception.message shouldContain "both docker and werkdock"
             exception.message shouldContain "builds.default"
         }
 

tools/remote

@@ -44,14 +44,15 @@
 # Optional in the env file:
 #   WERKATOR_INIT_CONFIG   the init fragment to apply (repo-init, instance-start)
 #   WERKATOR_REPO_URL      https clone URL of the watched repository
-#                          (default: https://github.com/mhoennig/werkator.git)
+#                          (default: https://git.javagil.de/mi/werkator.git)
 #   WERKATOR_REPO_DIR      directory of the watched repository, absolute or relative to
 #                          WERKATOR_PATH (default: werkator); it also names the systemd
 #                          unit, exactly as `init --systemd` derives it
 #   WERKATOR_INSTALL_DIR   directory holding the unpacked runtime bundle, absolute or
 #                          relative to WERKATOR_PATH (default: .werkator)
-#   WERKATOR_SANDBOX       build runtime of the host: bwrap (default) or docker; a docker
-#                          host needs neither the werkdock binary nor a rootfs archive
+#   WERKATOR_SANDBOX       build runtime of the host: werkdock (default, the bubblewrap
+#                          sandbox; `bwrap` is accepted as its former name) or docker —
+#                          a docker host needs neither the werkdock binary nor a rootfs
 #   WERKDOCK_REPO          checkout of the werkdock repository, whose binary the
 #                          instance runs (default: <repo>/../werkdock)
 #   WERKDOCK_BINARY        the built werkdock binary (default: $WERKDOCK_REPO/dist/werkdock)
@@ -121,7 +122,7 @@ require_env WERKATOR_REMOTE WERKATOR_PATH
 HOST="$WERKATOR_REMOTE"
 TARGET_DIR="$WERKATOR_PATH"
 ROOTFS="${WERKATOR_ROOTFS:-$REPO_ROOT/build/werkator-buildenv-trixie-java-go-node.tar.zst}"
-REPO_URL="${WERKATOR_REPO_URL:-https://github.com/mhoennig/werkator.git}"
+REPO_URL="${WERKATOR_REPO_URL:-https://git.javagil.de/mi/werkator.git}"
 
 # The host layout is three values, not one convention: an installation that grew
 # before this script existed puts them elsewhere, and the defaults are exactly what
@@ -137,10 +138,13 @@ REPO_DIR="$(resolve_dir "${WERKATOR_REPO_DIR:-werkator}")"
 INSTALL_DIR="$(resolve_dir "${WERKATOR_INSTALL_DIR:-.werkator}")"
 # where `repo-add` puts a further repository of the registry: beside the watched one
 SIBLING_DIR="$(dirname "$REPO_DIR")"
-SANDBOX="${WERKATOR_SANDBOX:-bwrap}"
+SANDBOX="${WERKATOR_SANDBOX:-werkdock}"
+# `bwrap` was the name of the config section until Werkator v1.2.0; accepted so an env
+# file written for the older script keeps working, normalised so only one name is used.
+[ "$SANDBOX" = "bwrap" ] && SANDBOX="werkdock"
 case "$SANDBOX" in
-    bwrap|docker) ;;
-    *) die "WERKATOR_SANDBOX is 'bwrap' or 'docker', not '$SANDBOX'" ;;
+    werkdock|docker) ;;
+    *) die "WERKATOR_SANDBOX is 'werkdock' or 'docker', not '$SANDBOX'" ;;
 esac
 
 MACHINE_CONFIG="$REPO_DIR/.git/werkator/.werkator.yml"