AGENTS.md

@@ -40,9 +40,9 @@ All production code lives under `de.hoennig.werkator`, with sub-packages `comman
 - Everything repository-scoped (results, artifacts, worktrees, git and config access) goes through a `RepoContext`, never through an implicit current directory: the executor serializes per (context, branch) under one global `maxConcurrent`, the watcher polls every context in its own guard. `RepoRegistry` opens one context per entry of the instance configuration `~/.werkator.yml` (ADR 0009), or the current directory without one; the instance-level keys (`server`, `executor`, `watcher.pollInterval`) and the `defaults` block are folded into every repository's effective config by `ConfigLoader` itself, so no consumer reads the home file directly. Server routes carry the repository as `/repos/<name>/…` and `/api/repos/<name>/…`, with the unscoped form permanently meaning the served repository; the pages stay per repository and a drop-down in the page title switches between them.
 - When config keys change, three places must stay in sync: the `WerkatorConfig` data classes, the `InitCommand` templates, and `docs/configuration.md`.
 - Every config file may declare `werkator.version.since`/`below` (the Werkator it is written for, never a format version — no API is involved). `since` is enforced in both directions, using `ConfigVersions.FORMAT_BROKE_IN` for "file predates a breaking change"; `below` only warns. A violation aborts the start for the machine and project config, but fails only that branch's builds for a branch config.
-- A branch describes its own CI: its committed `.werkator.yml` is the branch layer (`ConfigLoader.loadWithBranchLayer`, used by the watcher per origin branch and by `loadForWorktree` at build time) and takes precedence over `.git`/project — including the whole `builds` section, so a new configuration can be tried out on a branch without affecting other branches. Only the pinned set is stripped from that layer: secrets (`git`), host/repository sections (`server`, `gitea`, `executor`, `watcher`), the docker (`docker.enabled`, `docker.network`) and werkdock (`werkdock.enabled`, `werkdock.rootfs`, `werkdock.binary`) sandbox policies, and the trust gate (`requirePullRequest`). A branch must never reach credentials, disable its container or sandbox, change its network, substitute a foreign rootfs, raise global concurrency, or bypass its own pull-request gate; a branch's definitions apply to that branch alone.
+- A branch describes its own CI: its committed `.werkator.yml` is the branch layer (`ConfigLoader.loadWithBranchLayer`, used by the watcher per origin branch and by `loadForWorktree` at build time) and takes precedence over `.git`/project — including the whole `builds` section, so a new configuration can be tried out on a branch without affecting other branches. Only the pinned set is stripped from that layer: secrets (`git`), host/repository sections (`server`, `gitea`, `executor`, `watcher`), the docker (`docker.enabled`, `docker.network`) and werkdock (`werkdock.enabled`, `werkdock.rootfs`, `werkdock.binary`) sandbox policies, the trust gate (`requirePullRequest`), and the trigger of a follow-up build (`trigger.afterSuccessOf` everywhere, and the whole `trigger` block of a definition the host defines as a follow-up). A branch must never reach credentials, disable its container or sandbox, change its network, substitute a foreign rootfs, raise global concurrency, bypass its own pull-request gate, or deploy itself; a branch's definitions apply to that branch alone.
-- A build definition carries the complete description of its build, split in two: the `trigger` block (`onPush`, `atTimes`, `branches`, `activeWithin`) says when and for which branches it runs, everything else what it does. `builds.default` is the base every other definition inherits its settings — never its `trigger` — from. The split is structural so that a selector added to `TriggerConfig` later is non-inheritable by construction; writing a trigger key flat is refused, never ignored, because ignoring it leaves a build that silently stops running. A `!` prefix in `trigger.branches` excludes and always wins.
+- A build definition carries the complete description of its build, split in two: the `trigger` block (`onPush`, `atTimes`, `afterSuccessOf`, `branches`, `activeWithin`) says when and for which branches it runs, everything else what it does. `afterSuccessOf` makes a definition the follow-up of another one — a deployment is a build that follows a green build (PR#23): it runs at the predecessor's commit after every green run of it, whoever started that run, and the `FollowUpTrigger` that enqueues it is armed only by `Watcher.start()`. `builds.default` is the base every other definition inherits its settings — never its `trigger` — from. The split is structural so that a selector added to `TriggerConfig` later is non-inheritable by construction; writing a trigger key flat is refused, never ignored, because ignoring it leaves a build that silently stops running. A `!` prefix in `trigger.branches` excludes and always wins.
-- The inheritance is applied after all layers are merged: that order is what makes a build a branch invents inherit the host's sandbox policy instead of the data-class default, so the pinning also holds for a build the host has never heard of. Pinned are `requirePullRequest`, `statusContext`, `docker.enabled`, `docker.network`, `werkdock.enabled`, `werkdock.rootfs`, and `werkdock.binary`. Docker and werkdock are mutually exclusive per branch — enabling both is rejected at start. The section was called `bwrap` until v1.2.0 and is still read under that name, with a warning; the hard refusal waits for the release that sets `ConfigVersions.FORMAT_BROKE_IN`.
+- The inheritance is applied after all layers are merged: that order is what makes a build a branch invents inherit the host's sandbox policy instead of the data-class default, so the pinning also holds for a build the host has never heard of. Pinned are `requirePullRequest`, `statusContext`, `docker.enabled`, `docker.network`, `werkdock.enabled`, `werkdock.rootfs`, `werkdock.binary`, and the trigger of a follow-up build. Docker and werkdock are mutually exclusive per branch — enabling both is rejected at start. The section was called `bwrap` until v1.2.0 and is still read under that name, with a warning; the hard refusal waits for the release that sets `ConfigVersions.FORMAT_BROKE_IN`.
 - `builds` or the legacy `branches`, never both: `branches` is read only while the merged config defines no build at all (`builds.maxConcurrent` is not one), and ignored with a warning as soon as one exists. The section is deprecated and goes away once the repositories have migrated; then `ConfigVersions.FORMAT_BROKE_IN` gets set and a leftover `branches:` key must be rejected by name — the version check alone cannot catch a file that declares no version.
 - Web UI: server-rendered Thymeleaf plus one hand-written `static/werkator.js` — no SPA framework, no frontend build pipeline; every fetch has a timeout and an explicit error badge; `UiFormats` and `werkator.js` must produce identical display formats.
 - Git and Docker access shells out to the CLIs (`GitCommandRunner`, `docker`) — no JGit, no Docker SDK.

docs/configuration.md

@@ -101,7 +101,9 @@ single branch may decide it:
 - the container sandbox policy: `docker.enabled`/`docker.network` and
   `werkdock.enabled`/`werkdock.rootfs`/`werkdock.binary` — host-pinned as
   long as only the host's configuration sets them, master-pinned once the committed
-  configuration does.
+  configuration does;
+- the trigger of a [follow-up build](#follow-up-builds): `trigger.afterSuccessOf` in every definition, and the whole `trigger` block of a definition the host defines as a follow-up.
+  A branch may say what its deployment does, never that — or for which branches — it happens.
 
 The distinction is documentary.
 Werkator applies one rule: every pinned key is stripped from the branch layer, and the
@@ -110,7 +112,7 @@ The names say where a key is meant to live, not how it is enforced.
 
 This keeps a branch from reaching credentials, reporting statuses to another repository,
 raising the global concurrency, disabling its own build container, changing its network
-mode, or bypassing its own pull-request gate. Everything else is the branch's to decide —
+mode, bypassing its own pull-request gate, or deploying itself. Everything else is the branch's to decide —
 it can already run any command through `buildCommand`.
 The pinned settings are stripped wherever they appear, in a build definition as well as in
 a legacy `branches` entry. The deprecated `branches` section itself is read from the repo
@@ -252,6 +254,7 @@ builds:
       # branches: ["*", "!master"]   # names or globs; a "!" pattern excludes; default: all
       # atTimes: ["01:00"]           # daily UTC times HH:MM ("??:05" = every hour at :05)
       # activeWithin: 24h            # only branches with commits in the last 24h
+      # afterSuccessOf: test         # run after every green run of that build, at its commit (pinned)
     # run before each build
     cleanCommand: rm -rf build
     # shell command for each build
@@ -397,9 +400,50 @@ Writing any of its keys outside the block is refused with a message naming the d
 Triggers: `onPush: true` builds every new commit of the selected branches; `atTimes: ["HH:MM", …]` rebuilds their heads once per day and slot (UTC).
 A slot may also be written as `??:MM` — that minute of every hour, expanded to its 24 slots, so the build runs hourly.
 Only the latest due slot of a day triggers, so slots missed while the server was down are skipped instead of piling up, and a slot whose pool is still building is retried on the next poll cycle until it succeeds.
-A definition may have both; one with neither never triggers automatically — which is how `builds.default` is written when it is meant as a settings base only.
+A definition may combine them; one with none of the three triggers (`onPush`, `atTimes`, `afterSuccessOf`) never runs automatically — which is how `builds.default` is written when it is meant as a settings base only.
 Werkator logs a warning once when no definition has a trigger at all, because such an instance never builds anything on its own.
 
+#### Follow-up builds
+
+`afterSuccessOf: <name>` makes a definition a *follow-up* of another one, its *predecessor*: it runs on the predecessor's branch at the predecessor's commit whenever a run of the predecessor ends green.
+This is how a deployment is configured: a deployment is a build that follows a green build, and it gets everything a build has — its own row in History with log and duration, its own Gitea check under its own `statusContext`, restart, cancel, artifacts, and the per-branch serialization.
+
+Every green run counts, whatever started it — the push watcher, an `atTimes` slot, a UI restart, `werkator retry`, or the startup recovery — and a repeated green run of the same commit triggers the follow-up again.
+The follow-up builds the commit that was tested, not the branch's current origin head.
+A failed, cancelled, or interrupted run triggers nothing.
+The follow-up runs in the branch's worktree, after its predecessor, in the branch's sandbox or container — so a deployment tool like the Docker CLI is provided the way a compiler is.
+It inherits `builds.default` like every definition, so a deployment that wants the predecessor's output has to set `cleanCommand: ""` itself; a deployment command should rather be self-contained and rebuild what it ships, because a restart of the follow-up alone runs without its predecessor.
+The pull-request gate is not consulted for a follow-up: the predecessor passed it for the same commit, and the follow-up's `branches` selector is its own gate.
+
+The trigger of a follow-up is pinned: a branch's committed config can neither add `afterSuccessOf` to a definition nor change the `trigger` block of a definition the host defines as a follow-up, so a branch cannot deploy itself.
+What the deployment *does* comes with the repository, like every build command; where and when it happens, and with which credentials, is the host's.
+The host's part lives in `.git/werkator/.werkator.yml`; credentials reach the sandbox like any build setting, through `werkdock.env`/`docker.env`, and a file such as an SSH key through the werkdock sandbox's persistent toolchain home, `.git/werkator/buildenv/home/` on the host, which the sandbox mounts as `/root`.
+
+```yaml
+# .git/werkator/.werkator.yml — the host's part: when, for which branches, with what
+builds:
+  deploy:
+    trigger:
+      afterSuccessOf: frontend
+      branches: ["main"]
+    statusContext: werkator/deploy
+    werkdock:
+      env:
+        DEPLOY_TARGET: user@host:~/doms/example.org/htdocs-ssl
+```
+
+```yaml
+# .werkator.yml — the repository's part: what
+builds:
+  deploy:
+    cleanCommand: ""
+    buildCommand: scripts/deploy-prod.sh -y "$DEPLOY_TARGET"
+```
+
+A follow-up whose predecessor no definition has, and a cycle of follow-ups, refuse the start with a message naming the definition — a deployment that silently never runs is the failure the flat-key refusal exists to prevent.
+A branch whose committed config drops or renames the predecessor only loses its follow-up, with a warning naming the branch.
+A one-shot `werkator build` runs no follow-ups — its process ends with its build — and says which ones the server would have run.
+
 Selector: `trigger.branches` lists branch names or glob patterns (`*` matches any characters, also across `/`); empty selects all origin branches.
 A pattern prefixed with `!` excludes instead, and an exclusion always wins regardless of order — `["*", "!master"]` is every branch but master.
 That is how a branch gets a build of its own without being built by the default one as well.
@@ -409,6 +453,7 @@ Both parts combine as an intersection.
 Settings: `buildCommand`, `cleanCommand`, `artifactDirs`, `stdoutLog`/`stderrLog`, `requirePullRequest`, `statusContext`, and `docker` and `werkdock` with all their keys.
 A definition carries the complete description of its build; unset keys fall back to `builds.default` and then to Werkator's own defaults.
 `requirePullRequest`, `statusContext`, `docker.enabled`, `docker.network`, `werkdock.enabled`, `werkdock.rootfs`, and `werkdock.binary` are pinned (master-pinned, see [the branch layer](#the-branch-layer-a-branch-describes-its-own-ci)): they are read from the repo install/project config even when a branch sets them in its own committed config.
+So is the trigger of a [follow-up build](#follow-up-builds).
 Inheritance from `builds.default` covers the settings only — the `trigger` block says when and where *this* build runs and is never inherited.
 Definitions are part of the branch layer: a branch may add its own and override those from the project config, for its own builds only.
 Because the inheritance is applied after all layers are merged, a build a branch invents still inherits the host's `builds.default` — its sandbox policy included, which is what keeps the pinning effective for a build the host has never heard of.

src/main/kotlin/de/hoennig/werkator/commands/InitCommand.kt

@@ -222,6 +222,7 @@ class InitCommand(
                   # branches: ["*", "!master"]   # names or globs; "!" excludes; default: all
                   # atTimes: ["01:00"]           # daily UTC times HH:MM ("??:05" = every hour at :05)
                   # activeWithin: 24h            # only branches with recent commits
+                  # afterSuccessOf: test         # run after every green run of that build, at its commit (pinned)
                 # run before each build
                 cleanCommand: rm -rf build
                 # shell command for each build