docs(prs): the init-config-resolution PR-doc

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

docs/prs/2026-09-04-PR#20-deflake-maxconcurrent-test.md

@@ -0,0 +1,42 @@
+> **WARNING:** This document describes only the change applied in this PR.
+> It may already be outdated once the next PR is merged.
+> Historic PR-documentation is not maintained along with new PRs — treat it as a snapshot, not as current documentation.
+
+## The Problem
+
+The build for commit `7028ca8` on `main` failed on the mih09 production instance with
+`BuildExecutorTest > with maxConcurrent 1 a second branch stays PENDING until the first finished`,
+while a retry of the very same commit passed, and the test passes locally.
+
+The test was timing-dependent.
+It started a build for `branch-a` whose build command was `sleep 1`, immediately started a second build for `branch-b`,
+and then asserted — without any synchronization at all — that `branch-b` was still `PENDING`.
+
+That assertion only held as long as the test thread reached it within the one second `branch-a` slept.
+On a shared host under CPU contention the executor can get through `branch-a` entirely (queued, running, slept, succeeded) first,
+and `branch-b` is then already `RUNNING` or `SUCCESS` when the assertion runs.
+The failure therefore says nothing about the executor; it is pure scheduling noise that costs a build and a retry every time it hits.
+
+## Non-Goals
+
+- No change to production code — `BuildExecutor` is not touched, its queueing behaviour is unchanged.
+- No sweep of the other timing-sensitive tests in the suite; only the one that actually flaked is fixed.
+
+## The Solution
+
+`branch-a` no longer sleeps for a fixed time, it blocks until the test says so:
+its build command is `until [ -f gate ]; do sleep 0.05; done`, and the build workspace is the test's working directory.
+
+The test now
+1. waits (via `eventually`) until `branch-a` is `RUNNING`, so the single executor slot is provably occupied,
+2. asserts that `branch-b` is `PENDING` — which cannot race anything, because `branch-a` cannot finish before the gate file exists,
+3. creates the gate file, and only then awaits both builds' `SUCCESS`.
+
+The assertion on the event transitions (`branch-b` goes `RUNNING` only after `branch-a` reached `SUCCESS`) is unchanged.
+A blocking gate was chosen over a mocked `BuildRunner` because it keeps the test on the real `ProcessBuildRunner`,
+so it still covers the actual process handling rather than only the executor's bookkeeping.
+
+Verified by running `BuildExecutorTest` five times on an idle machine and three more times with twice `nproc` busy-loops saturating the CPU,
+which is the condition that produced the original failure.
+
+- [BuildExecutorTest](../../src/test/kotlin/de/hoennig/werkator/build/BuildExecutorTest.kt)

docs/prs/2026-09-04-PR#21-gitea-default-clone-url.md

@@ -0,0 +1,30 @@
+> **WARNING:** This document describes only the change applied in this PR.
+> It may already be outdated once the next PR is merged.
+> Historic PR-documentation is not maintained along with new PRs — treat it as a snapshot, not as current documentation.
+
+## The Problem
+
+The repository's home is `https://git.javagil.de/mi/werkator.git` since the move to the own Gitea instance,
+but `tools/remote` still defaulted `WERKATOR_REPO_URL` to the GitHub mirror.
+
+The mih09 production instance was cloned from that mirror and consequently watched a `main` that nobody pushes to any more:
+it kept reporting the last GitHub state as green while three merged pull requests sat unbuilt on the real `main`.
+The failure that started this — a flaky test already fixed on Gitea's `main` — could not be re-verified live,
+because the instance had no way to see the fix.
+
+## Non-Goals
+
+- The existing clone on mih09 is not touched by this change; its remote was repointed by hand (`git remote set-url`), and `repo-init` skips an existing clone.
+- The generic placeholder URLs in `docs/deployment.md` stay as they are — they describe cloning *any* watched repository, not werkator's own.
+- No decision about mirroring to GitHub; the mirror simply stops being the source an instance builds from.
+
+## The Solution
+
+`REPO_URL` in [tools/remote](../../tools/remote) defaults to the Gitea URL, and the usage comment says so.
+
+The value stays overridable via `WERKATOR_REPO_URL` in the instance's env file,
+so an installation that deliberately watches a different remote is unaffected.
+Anonymous HTTPS works against Gitea exactly as it did against GitHub, so no deploy key or token is involved.
+
+Note that pull requests opened via AGit-Flow create no branch in Gitea,
+so an instance watching this remote sees `main` only — branch builds require pushing real branches.

docs/prs/2026-09-04-PR#22-init-config-resolution.md

@@ -0,0 +1,90 @@
+> **WARNING:** This document describes only the change applied in this PR.
+> It may already be outdated once the next PR is merged.
+> Historic PR-documentation is not maintained along with new PRs — treat it as a snapshot, not as current documentation.
+
+## The Problem
+
+`init --systemd` generates the host integration — the systemd unit's resource limits, the Apache `.htaccess` and the maintenance page — from the effective configuration.
+It read that configuration through a helper with two independent defects, both of which fail silently.
+
+**It swallowed every error.**
+The load sat in `try { … } catch (_: Exception) { ServerConfig() }`.
+Any configuration error at all — a missing required field, a malformed layer, a version floor violation — produced a default `ServerConfig` with a blank `publicBaseUrl`.
+A repository with a broken `.werkator.yml` then looked exactly like one that simply has no public base URL configured:
+the `.htaccess` and the maintenance page were skipped without a word.
+This surfaced while verifying [PR#17](2026-09-03-PR%2317-maintenance-page.md) on mih09, where the missing files looked like an unconfigured `publicBaseUrl` and were in fact an unrelated validation error.
+
+**It read from the wrong directory.**
+The helper called `configLoader.load(Paths.get("."))` — the process's current directory — while everything else in the command works off the git top level resolved by `GitService.getTopLevel`.
+`ConfigLoader.loadRaw` resolves the layers directly under the directory it is given and does not walk up to the repository root, so the two agree only when `init` happens to be invoked from the root itself.
+From a subdirectory the command read another repository's configuration, or none.
+That also broke `--apply`: the fragment is installed into the repository root deliberately before the systemd files are written, so that its port and limits reach the generated unit, and a current-directory read does not see it.
+
+`init --systemd` runs during initial deployment setup, which is exactly when a silent wrong answer is most expensive.
+
+## Non-Goals
+
+- The fallback itself is kept: a configuration that cannot be loaded is not fatal for `init`, the units are still generated with the defaults.
+  During the very first bootstrap there is legitimately nothing to load yet.
+- No change to `ConfigLoader`, to the configuration schema, or to any other command.
+- No sweep for catch-all exception handlers elsewhere in the code base;
+  the two other `catch` blocks in `InitCommand` already print an `Error:` and abort, so they were only checked, not changed.
+
+## The Scenarios
+
+### Feature: init reports what it read and where it read it from
+
+#### Background
+
+- The *repository root* is the git top level as resolved by `GitService.getTopLevel`, the directory holding `.werkator.yml`, `.git/werkator/.werkator.yml` and an applied fragment.
+- The *current directory* is the process working directory, which is the repository root only when `init` is invoked there.
+
+#### Scenario#22.01: A broken configuration is named, not defaulted over
+
+So that a validation error during deployment setup is not mistaken for an unconfigured installation.
+
+- **Given** a repository whose effective configuration cannot be loaded
+- **When** `init --systemd` runs
+- **Then** the exception message is printed as a warning
+  - **and** the unit files are still generated with the default settings
+  - **and** the warning appears exactly once, although three settings are read from the configuration
+
+##### Verified by
+
+- [InitCommandTest: `--systemd warns once when the effective configuration cannot be loaded`](../../src/test/kotlin/de/hoennig/werkator/commands/InitCommandTest.kt)
+
+#### Scenario#22.02: The configuration is read from the repository root
+
+So that the generated host integration reflects the repository being initialized, whatever directory `init` was invoked from.
+
+- **Given** a repository whose root configuration sets `server.publicBaseUrl` and `server.port`
+- **and** a current directory that is not that repository root
+- **When** `init --systemd` runs
+- **Then** the `.htaccess` and the maintenance page are generated
+  - **and** the `.htaccess` proxies to the port from the root configuration
+
+##### Verified by
+
+- [InitCommandTest: `--systemd reads the configuration from the repository root, not the current directory`](../../src/test/kotlin/de/hoennig/werkator/commands/InitCommandTest.kt)
+
+## The Solution
+
+The catch-all now prints the exception message before falling back:
+
+```
+Warning: the effective configuration could not be loaded (<message>)
+  continuing with default server settings — check the generated unit and host files
+```
+
+The configuration is read three times while the systemd files are written (`memoryMax`, `tasksMax`, `publicBaseUrl`), which would repeat the warning three times.
+It is therefore loaded once per run and cached in the command, and the cache is reset at the top of `run()` so a reused instance — the command is a Spring singleton — re-reads.
+
+The repository root is passed down into the two accessors instead of `Paths.get(".")`.
+This matches every other caller of `ConfigLoader.load` in the code base, all of which pass an explicit working directory;
+`InitCommand` was the only one relying on the process's current directory.
+
+Both fixes are the same failure in two forms — the command answered from a configuration it never actually read — which is why they are in one PR.
+
+## Additional Changes
+
+- None.

src/main/kotlin/de/hoennig/werkator/commands/InitCommand.kt

@@ -48,6 +48,7 @@ class InitCommand(
     internal var javaExecutableResolver: () -> Path = { Paths.get(System.getProperty("java.home"), "bin", "java") }
 
     override fun run() {
+        cachedServerConfig = null
         val normalizedWorkingDir = workingDir.toAbsolutePath().normalize()
         val root =
             try {
@@ -296,14 +297,31 @@ class InitCommand(
      * already loadable (re-running `init --systemd` on an installed instance); during
      * the very first bootstrap they stay unset and the defaults (no directives) apply.
      */
-    private fun loadedSystemdConfig(): de.hoennig.werkator.config.SystemdConfig = loadedServerConfig().systemd
+    private fun loadedSystemdConfig(root: Path): de.hoennig.werkator.config.SystemdConfig = loadedServerConfig(root).systemd
 
-    private fun loadedServerConfig(): de.hoennig.werkator.config.ServerConfig =
+    /** Loaded once per run, so a broken configuration is reported once and not per caller. */
+    private var cachedServerConfig: de.hoennig.werkator.config.ServerConfig? = null
+
+    /**
+     * Read from the repository root like every other file this command touches — the
+     * layers sit there, not in whatever directory the process happens to run in, and
+     * an applied fragment must reach the generated unit even when `init` is invoked
+     * from a subdirectory.
+     *
+     * A configuration error here is not fatal — the units are still generated with defaults —
+     * but it must not pass for "nothing configured": without the warning a broken `.werkator.yml`
+     * looks exactly like an unset `publicBaseUrl` and the host integration is skipped silently.
+     */
+    private fun loadedServerConfig(root: Path): de.hoennig.werkator.config.ServerConfig =
+        cachedServerConfig ?: run {
             try {
-            configLoader.load(Paths.get(".")).server
-        } catch (_: Exception) {
+                configLoader.load(root).server
+            } catch (e: Exception) {
+                println("Warning: the effective configuration could not be loaded (${e.message})")
+                println("  continuing with default server settings — check the generated unit and host files")
                 de.hoennig.werkator.config
                     .ServerConfig()
+            }.also { cachedServerConfig = it }
         }
 
     private fun createSystemdFiles(
@@ -327,8 +345,8 @@ class InitCommand(
                 javaExecutable = javaExecutableResolver(),
                 jarPath = jarPath,
                 envFile = envFile,
-                memoryMax = loadedSystemdConfig().memoryMax,
-                tasksMax = loadedSystemdConfig().tasksMax,
+                memoryMax = loadedSystemdConfig(root).memoryMax,
+                tasksMax = loadedSystemdConfig(root).tasksMax,
             ),
         )
         println("created ${unitFile.toFile().relativeTo(normalizedWorkingDir.toFile())}")
@@ -351,7 +369,7 @@ class InitCommand(
 
         // generated host integration like the units: only meaningful behind a web
         // frontend, so it needs a public base URL; unused elsewhere and harmless
-        val server = loadedServerConfig()
+        val server = loadedServerConfig(root)
         if (server.publicBaseUrl.isNotBlank()) {
             val htaccessFile = werkatorDir.resolve(SystemdServiceFiles.HTACCESS_NAME)
             htaccessFile.toFile().writeText(SystemdServiceFiles.htaccessContent(server.port))

src/test/kotlin/de/hoennig/werkator/build/BuildExecutorTest.kt

@@ -505,6 +505,8 @@ class BuildExecutorTest : FunSpec() {
         }
 
         test("with maxConcurrent 1 a second branch stays PENDING until the first finished") {
+            // branch-a blocks on a gate file the test creates, so the PENDING assertion
+            // below cannot race the first build finishing on a loaded machine
             val h =
                 Harness(
                     """
@@ -512,7 +514,7 @@ class BuildExecutorTest : FunSpec() {
                       maxConcurrent: 1
                     branches:
                       branch-a:
-                        buildCommand: "sleep 1"
+                        buildCommand: "until [ -f gate ]; do sleep 0.05; done"
                         cleanCommand: ""
                       branch-b:
                         buildCommand: "echo ok"
@@ -523,8 +525,13 @@ class BuildExecutorTest : FunSpec() {
             h.executor.startBuild(h.repo, "branch-a", "sha-a")
             h.executor.startBuild(h.repo, "branch-b", "sha-b")
 
+            eventually(30.seconds) {
+                h.repository.latestFor("branch-a")?.status shouldBe BuildStatus.RUNNING
+            }
             h.repository.latestFor("branch-b")?.status shouldBe BuildStatus.PENDING
 
+            Files.createFile(h.workingDir.resolve("gate"))
+
             awaitStatus(h, "branch-b", BuildStatus.SUCCESS)
             awaitStatus(h, "branch-a", BuildStatus.SUCCESS)
             val transitions = h.events.map { it.result.branch to it.result.status }

src/test/kotlin/de/hoennig/werkator/commands/InitCommandTest.kt

@@ -252,5 +252,50 @@ class InitCommandTest : FunSpec() {
             // This should not throw IllegalArgumentException
             initCommand.run()
         }
+
+        test("--systemd reads the configuration from the repository root, not the current directory") {
+            val tempDir = Files.createTempDirectory("werkator-init-test")
+            // written before the run, so `init` keeps it instead of creating a template
+            tempDir.resolve(".werkator.yml").toFile().writeText(
+                "server:\n  publicBaseUrl: \"https://werkator.example.org/\"\n  port: 18099\n",
+            )
+            initCommand.workingDir = tempDir
+            initCommand.systemd = true
+            initCommand.jarPathResolver = { Paths.get("/home/ci/bin/werkator.jar") }
+            initCommand.javaExecutableResolver = { Paths.get("/usr/bin/java") }
+
+            every { gitService.getTopLevel(tempDir) } returns tempDir
+            every { gitService.getOriginUrl(tempDir) } returns "https://git.example.org/my-org/my-repo.git"
+
+            initCommand.run()
+
+            // the host integration is generated only when the root's config has a public base URL
+            val htaccess = tempDir.resolve(".git/werkator/${SystemdServiceFiles.HTACCESS_NAME}")
+            htaccess.toFile().shouldExist()
+            htaccess.toFile().readText() shouldContain "18099"
+            tempDir.resolve(".git/werkator/${SystemdServiceFiles.MAINTENANCE_PAGE_NAME}").toFile().shouldExist()
+        }
+
+        test("--systemd warns once when the effective configuration cannot be loaded") {
+            val tempDir = Files.createTempDirectory("werkator-init-test")
+            val brokenLoader = mockk<de.hoennig.werkator.config.ConfigLoader>()
+            every { brokenLoader.load(any()) } throws IllegalStateException("gitea.owner is required")
+            val command = InitCommand(gitService, brokenLoader)
+            command.workingDir = tempDir
+            command.systemd = true
+            command.jarPathResolver = { Paths.get("/home/ci/bin/werkator.jar") }
+            command.javaExecutableResolver = { Paths.get("/usr/bin/java") }
+
+            every { gitService.getTopLevel(tempDir) } returns tempDir
+            every { gitService.getOriginUrl(tempDir) } returns "https://git.example.org/my-org/my-repo.git"
+
+            val console = captureConsole { command.run() }
+
+            console.stdout shouldContain "gitea.owner is required"
+            // the three readers of the configuration must not repeat the warning
+            console.stdout.windowed("Warning:".length).count { it == "Warning:" } shouldBe 1
+            // the units are still written with the defaults
+            tempDir.resolve(".git/werkator/${SystemdServiceFiles.unitName(tempDir)}").toFile().shouldExist()
+        }
     }
 }

tools/remote

@@ -44,7 +44,7 @@
 # Optional in the env file:
 #   WERKATOR_INIT_CONFIG   the init fragment to apply (repo-init, instance-start)
 #   WERKATOR_REPO_URL      https clone URL of the watched repository
-#                          (default: https://github.com/mhoennig/werkator.git)
+#                          (default: https://git.javagil.de/mi/werkator.git)
 #   WERKATOR_REPO_DIR      directory of the watched repository, absolute or relative to
 #                          WERKATOR_PATH (default: werkator); it also names the systemd
 #                          unit, exactly as `init --systemd` derives it
@@ -122,7 +122,7 @@ require_env WERKATOR_REMOTE WERKATOR_PATH
 HOST="$WERKATOR_REMOTE"
 TARGET_DIR="$WERKATOR_PATH"
 ROOTFS="${WERKATOR_ROOTFS:-$REPO_ROOT/build/werkator-buildenv-trixie-java-go-node.tar.zst}"
-REPO_URL="${WERKATOR_REPO_URL:-https://github.com/mhoennig/werkator.git}"
+REPO_URL="${WERKATOR_REPO_URL:-https://git.javagil.de/mi/werkator.git}"
 
 # The host layout is three values, not one convention: an installation that grew
 # before this script existed puts them elsewhere, and the defaults are exactly what