`gitTally` is the name of another product in the git space, so the
rename is a precaution; nothing about what the build system does changes.
The name follows one rule: `Werkator` where it is prose, capitalized
where it is a Kotlin type and its file, lowercase everywhere a machine
reads it — the command, packages, paths, configuration keys and values,
the Gitea check context. Environment variables keep their convention and
are uppercase throughout.
Every configuration file is still found under its pre-rename name
(`ConfigFiles`): `.gittally.yml` at the repository root, in a build
worktree and as committed on a branch, `.git/gittally/.gittally.yml` for
the machine layer. The current name wins where both exist, and the old
file is then ignored rather than merged — two files side by side are a
half-done rename, not a layering. Without the fallback an installation
that updated without renaming would not fail: a configuration that is
not found leaves every setting at its default, so it would come up
looking healthy while having forgotten its credentials and its builds.
`docs/werkator-migrationsplan.md` lists what the fallback does not
cover and has to be moved by hand — above all the state directory
`.git/werkator/`, which holds the build history, the control token and
the worktrees, and has no fallback of its own.
`docs/migration-from-legacy.md` is deleted with this: it mapped the
legacy script's environment variables, and every host it addressed has
long since moved to the YAML configuration.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A watcher that cannot fetch leaves the server perfectly reachable and
every branch row stale — a calm list that implies nothing changed. The
state was already recorded and served at /api/watcher; only nothing
rendered it.
The banner lives in the shared nav fragment, so every view inherits it,
and is fed from the view's own polling tick without being chained to it.
It stays separate from live-indicator: that one reports whether the
browser reaches the server, this one whether the server reaches origin.
Also caps the log volume the outage exposed: a lasting fetch failure is
logged when its message changes, not on every cycle, and the recovery is
logged once. Same for an invalid atTimes slot.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`onPush`, `atTimes`, `branches`, and `activeWithin` move into a nested
`trigger`. The split is structural on purpose: the inheritance from
`builds.default` now subtracts one key instead of a list of four, so a
selector added to `TriggerConfig` later is non-inheritable by
construction rather than because someone remembered to extend the list.
A definition still writing those keys flat is refused by name, per file
and scoped like the version check — the machine and project config abort
the start, a branch's committed config fails only that branch. Ignoring
them would leave the build with no trigger at all, which is a job that
quietly stops running: the failure this refusal exists to prevent.
Two more things a definition can now say:
- A `!` prefix in `trigger.branches` excludes, and an exclusion wins
whatever the order. `["*", "!master"]` gives one branch a build of its
own without the default build running over it as well — until now the
only way out of that double build was to drop the second definition's
push trigger.
- `statusContext` overrides the Gitea check this build reports as, empty
keeping the repository-wide one. Two builds of a commit shared a
context and overwrote each other's result, so a quick check beside a
long build was not readable in Gitea. Pinned like `requirePullRequest`:
a branch that could pick its context could take over the check a branch
protection rule depends on.
Fixed on the way: a branch whose builds all belong to named definitions
rendered an empty row in the branches view, reading as "never built"
directly beside its real builds. That row was unreachable before the
exclusion patterns made such a branch possible.
`builds` and the legacy `branches` are now either/or: `branches` is read
only while the merged configuration defines no build at all — a leftover
`builds.maxConcurrent` is not one — and ignored with a warning as soon as
one exists. Two half-answers to "what does this build run" would silently
pull against each other, and the committed configs still carrying both
must not change behaviour before they are migrated.
A definition therefore gained the settings it was missing:
`requirePullRequest` and `docker.enabled`/`network`. Those stay pinned —
`stripPinned` now removes them from a branch layer wherever they appear,
in a definition as well as in a legacy branch entry.
`builds.default` becomes the base every other definition inherits its
settings from, never its trigger: `onPush`, `atTimes`, `branches`, and
`activeWithin` say when and where *this* build runs. The inheritance is
applied after all layers are merged, which is what makes a build invented
on a branch inherit the host's sandbox policy instead of the data-class
default — otherwise a branch could get a native build past the pinning by
defining a job the host has never heard of.
Two bugs found on the way, both the same shape as the build command the
artifact page used to get wrong:
- `FileArtifactStore` read the artifact directories from the plain branch
settings, so a job adding its own `artifactDirs` never had them stored.
It goes through `GitTallyConfig.buildSettings` now, like everything else
that asks what a build runs.
- `Watcher.definitionsFor` cached the per-branch definitions by head
commit alone, so an edited machine or project config only took effect
once the branch moved — on a quiet branch, never. The primary config is
part of the cache key now.
Until now a version that renames or drops a key did not fail — it silently
ignored what it no longer understood, and the effect surfaced as a build
doing the wrong thing. Both directions of that happened within two days:
a branch config using `??:00` on a GitTally that did not know it yet, and a
`builds.maxConcurrent` that had moved to another section.
gitTally:
version:
since: "0.9.18" # enforced
below: "2.0" # release marker; GitTally decides how strictly
There is deliberately no version of the file format (no `apiVersion`): no API
is involved — GitTally reads its own configuration — and only one generation
is ever supported. The declaration exists to make an incompatibility
nameable, never to run two parsers.
`since` is hard in both directions. Too new a requirement is refused, and so
is a file written before the version in which the configuration format last
broke (`ConfigVersions.FORMAT_BROKE_IN`, empty for now) — that check needs no
declared ceiling, because GitTally knows its own breaking changes.
`below` is the team's release marker and only warns: an unmaintained caution
value must never stop a CI. The routine it serves is the one known from IDE
plugins — new version, warning, try it, then raise the marker and commit.
The reach of a violation follows the layer: the machine and project configs
abort the start naming the file and the rollback, while an incompatible
branch config fails only that branch's builds. A branch cut before a
migration must not stop the server or hold up the branches that are fine.
A file that declares nothing keeps working, and the CLI prints one line
instead of a stack trace.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A branch's committed .gittally.yml describes that branch's CI, so it wins
over the project and repo-install config — the `builds` section included.
Pinning it was wrong: a new build definition can only be tried out by
committing it on a branch, and pinned it neither took effect at build time
nor existed for the watcher, so the job silently never ran.
The watcher now decides per branch from that branch's own definitions,
reading its committed config via `git show` and caching it by head commit,
so the read happens only when the branch moved; an unreadable config falls
back to the primary definitions instead of failing the poll cycle. A
branch's definitions are evaluated for that branch alone, so a definition
committed on one branch can never trigger builds of another.
The pinned set is reduced to what does not describe this branch's build:
secrets (`git`), the host and repository sections (`server`, `gitea`,
`executor`, `watcher`), the sandbox policy (`docker.enabled`/`network`),
and the trust gate (`requirePullRequest`). Letting a branch set its own
build command through a definition grants no new power — `branches.*.
buildCommand` always allowed exactly that — while the sandbox and the gate
decide whether untrusted branch code runs on the host at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
builds.maxConcurrent mixed an execution setting into the build
definitions as a reserved key. The limit now lives in the new executor
section (pinned like the builds section, enforced for all builds
regardless of trigger), default 1, without a compatibility alias — a
leftover builds.maxConcurrent key is rejected as an invalid build
definition. Recorded as a follow-up in ADR 0007.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ADR 0007: the YAML builds section (next to the reserved maxConcurrent
key) defines named builds (jobs) with onPush/atTimes triggers, branch
selectors (name globs, activeWithin age filter), and build-setting
overrides applied last over the merged branch config. The implicit
default build (onPush over all branches) preserves the previous
behavior; the section is pinned against the worktree layer.
Results record the job name; restart, retry, and startup recovery
re-run by it, resolving settings from the current config. A non-default
build records under the <branch>@<build> pool with its own row,
retention count, and permanent latest-green link.
branches.*.autoBuild stays as a deprecated alias (plain times only);
the unreleased-in-practice v0.9.13 per-slot buildCommand/name syntax is
removed again.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A branches.<name>.autoBuild.times entry is now either a plain HH:MM
string or an object with time, its own buildCommand, and a name, so a
nightly slot can run a fuller check than the on-commit builds. The
watcher passes the slot's command and name to the executor, persisted in
the build result — UI restarts, gittally retry, and the startup recovery
repeat a build with the command and name it originally ran under.
A named slot (e.g. master@nightly) gets its own pool: repository
grouping, retention count, branches-view row (sorted after its branch),
latest status, and permanent latest-green artifact link are keyed by the
build name, while origin lookups, gone-branch pruning, worktrees, and
Gitea links/statuses stay keyed by the real branch. Without a name,
slot builds share the branch's pool as before.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Build worktrees share the primary checkout's .git, so build tools can read
refs/heads there. Since the rewrite never moved those refs, they stayed frozen at
the last checkout: hs.hsadmin.ng's prQuickCheck compares master with
origin/master and therefore failed every build once origin moved on.
The sync runs after the enqueue decision on purpose — a local ref lagging behind
origin is exactly how the watcher recognizes new commits, so keeping the refs in
sync earlier (cron job, mirroring refspec, or this step moved up) would silence
the branch instead of building it.
Fast-forward only, as a compare-and-swap against the commit just read: diverged
or ahead branches stay untouched, and the checked-out branch is advanced with
merge --ff-only, which refuses to overwrite conflicting uncommitted changes.
Switched off with watcher.fastForwardLocalRefs: false.
Co-Authored-By: Claude <noreply@anthropic.com>
A systemd stop killed the running build process and BuildExecutor
classified the death as FAILED, posting a red Gitea status; FAILED is
not restartable, so the startup recovery never re-enqueued the build.
A ContextClosedEvent listener now sets a shuttingDown flag, terminates
the process trees of executing builds, and drains until their
INTERRUPTED results are persisted. Queued builds stay PENDING without
starting a process; recovery re-enqueues both after the restart.
INTERRUPTED publishes as Gitea state "pending" instead of "failure",
since the build is going to be re-run.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two fixes from the vm4006 rollout (docs/plan/16-git-in-docker-builds.md):
Rootless daemons map the host user to container root, so running the build
container as --user <host-uid> put it into the subuid range and it could not
even create .gradle in a fresh worktree (legacy only worked because its
ownership-repair chown had accidentally moved build/ and .gradle/ into subuid
ownership in its reused primary checkout). The container now always runs as
--user 0: the unprivileged host user under rootless, real root under rootful
where the ownership repair still applies; under rootless it degenerates to 0:0.
Git now works inside build containers: the primary .git is mounted read-only
with .git/gittally/ masked by an empty tmpfs (git.token and the control token
stay unreachable, the workspace bind resurfaces only the build's own worktree)
and the worktree admin dir mounted read-write for index-refreshing commands.
Verified on vm4006: git log/status succeed, the machine config is invisible,
ref writes fail on the read-only mount.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
